armature reactant means loss in armature associated with inductive properties of the coil, while armature reaction include losses due to magnetizing component of current flowing through armature.
24 volt armature is accept balancing cut
The armature reaction is the interaction between armature flux and field flux when current is introduced to a dc motor. It results in a cross-magnetizing effect and a demagnetizing effect.
Resistance is a concept used for DC. the current through a resistance is in phase with the applied voltage Reactance is used for AC the current through a inductive reactance lags the applied voltage by 90 degrees. the current through capacitive reactance leads the applied voltage by 90 degrees. the net reactance is the difference between inductive and capacitive reactance
rooter is start of (R)and armature is start of (a) ...........Written By................................................ ...........Prof....Guffar sb (Snath Jesoriya)IET
No there is no difference between action and reaction forces!
Armature reaction is the interaction between the magnetic flux produced by armature current and that of the main magnetic field in an electric motor or generator.
24 volt armature is accept balancing cut
The armature reaction is the interaction between armature flux and field flux when current is introduced to a dc motor. It results in a cross-magnetizing effect and a demagnetizing effect.
Resistance is a concept used for DC. the current through a resistance is in phase with the applied voltage Reactance is used for AC the current through a inductive reactance lags the applied voltage by 90 degrees. the current through capacitive reactance leads the applied voltage by 90 degrees. the net reactance is the difference between inductive and capacitive reactance
rooter is start of (R)and armature is start of (a) ...........Written By................................................ ...........Prof....Guffar sb (Snath Jesoriya)IET
Impedance is the net reactance(for Capacitors and inductors in the circuit) / Resistance of the circcuit whereas reactance is the prperty of the individual passive components ( only capacitors n inductors) to resist the flow of charge.
In voltage commutation process, the introduction of interpoles between main poles compensate armature mmf and reduces the effect of armature reaction.
Difference between field controlled and armature controlled is that field control is open loop and armature current is closed loop.
No there is no difference between action and reaction forces!
In salient pole alternator Xar is unequal in D-axis and Q-axis, due to non uniform air gap where as in non-salient pole Xar is equal in every axis due to uniform airgap between stator and rotor. Xar is armature reaction reactance.
There is no difference, these are 2 names for an identical reaction.
Resistance is constant no matter the frequency applied. Reactance varies depending on the frequency of the power applied to it.