The compare and subtract instructions in the 8085 both subtract one operand from another, and set flags accordingly. The subtract instruction stores the result in the accumulator, while the compare instruction does not - except for the flags, the compare instruction "throws" the result away.
The compare instruction (CMP) in the 8085 subtracts the two operands but does not store the results. What it does do is set flags, in particular, zero, negative, carry, parity, and auxillary carry, so you can follow up the instruction with a conditional branch or call instruction to perform some operation based on the comparison of those two numbers.
There is no exit instruction in the 8085. Do you mean return, as in from a function or interrupt? If so, the instruction is RET.
Not in the 8085.
There are 74 instructions in the 8085 microprocessor.
MUL is not an 8085 instruction.
this instruction is used to add the specified register content to that of the accumulator along with the carry flag value. this instruction is used in processes which involve continuous addition.
CALL, requiring 18 clock cycles.
There are 74 instructions in the 8085 microprocessor.
The NOP instruction is a no-operation instruction. It does nothing to the state of the machine, except to use some time. In the case of the 8085, it uses four clock cycles plus however many wait states are need to access the NOP instruction from memory.
There are no instructions in the 8085 that execute in only one clock pulse. The minimum number of clock cycles is four; three for instruction fetch and one for instruction decode/execute.
stores next instructions
The 8085 is an 8 bit processor, so its word length is 8 bits.
Push instruction pushes two byte of data on the top of the stack.