Resistance is the property of a conductor, which determines the quantity of current that passes through it when a potential difference is applied across it.
A resistor is a electrical componet with a predetermined electrical resistance, like 1 ohm, 10 ohms 100 ohms 10000 ohms etc..
depending on how much current you want to pass through a circuit, you would design the circuit with the required resistors
A resistor is a resistor. Plain and simple. By Ohm's Law, resistance in ohms is voltage in volts divided by current in amperes. The difference lies in application, not in the resistor itself. A normal resistor will introduce a voltage drop or current that makes some effect in the circuit, based on some design criteria. A bleeder resistor, on the other hand does not really affect the circuit - it is only there to "bleed off", or discharge, capacitors when the power is turned off. Consequently, a bleeder resistor will typically have a higher resistance than a normal resistor but, again, the issue is circuit design, not the resistor itself.
If you are placing more than one resistors in series, then its combined resistance is higher than when you place these resistors in shunt.
Resistance (Ohms) = Potential Difference (Volts) / Current (Amps) So, 12/0.25 = 48 Ohms.
6 volts
No such resistor exists. Any resistor placed in parallel with a 6.0 ohm resistor is going to reduce the combined resistance below 6.0 ohms.
A non-ohmic resistor doesn't have a constant resistance. A ohmic resistor has a constant resistance.
Resistor is a current a insulator is a not conductive and conductors can conduct.
Variable resistors means that a resistor which can change its resistance by control by any person or it self and fixed resistor means that it can not change its value.
I am not sure how the two objects of equal resistance are supposed to be connected. But for a current to flow, for example across a resistor, there must be a voltage difference between the terminals of this resistor.
The difference between a variable resistor and a rheostat is the same as the difference between six and half a dozen.
The difference between a Transistor and a Resistor is that a transistor is designed to amplify the electrical current, whereas a Resistor is designed to reduce the electrical current.
A resistor is a resistor. Plain and simple. By Ohm's Law, resistance in ohms is voltage in volts divided by current in amperes. The difference lies in application, not in the resistor itself. A normal resistor will introduce a voltage drop or current that makes some effect in the circuit, based on some design criteria. A bleeder resistor, on the other hand does not really affect the circuit - it is only there to "bleed off", or discharge, capacitors when the power is turned off. Consequently, a bleeder resistor will typically have a higher resistance than a normal resistor but, again, the issue is circuit design, not the resistor itself.
Resistance is the property of a conductor, which determines the quantity of current that passes through it when a potential difference is applied across it. A resistor is a electrical componet with a predetermined electrical resistance, like 1 ohm, 10 ohms 100 ohms 10000 ohms etc.. depending on how much current you want to pass through a circuit, you would design the circuit with the required resistors
If you are placing more than one resistors in series, then its combined resistance is higher than when you place these resistors in shunt.
Resistance (Ohms) = Potential Difference (Volts) / Current (Amps) So, 12/0.25 = 48 Ohms.
Difference between thick and thin film resistor is not related to thickness but its based on how the film is applied to the surface.
dpr8ea9 is a resistor plug dp8ean is non resistor.