It's been a while since I've messed with point type distributors, but if I remember correctly it should be 28-32 degrees.
The dwell for the points should be 30 degrees. The spark plug gap should be .040".
Should be 0.021.
Dwell=30. Timing +6
My advice would be to set the points at .020" with a feeler gage to get the engine running, and then use a dwell meter to set the dwell after the engine is running.
Dwell is 28-32 degrees and the plug gap is .035
By dwell use a meter 28-32 degrees
The dwell for the points should be 30 degrees. The spark plug gap should be .040".
Typically around 28-32 degrees
If you set the points at 30 degrees you will be fine.
what is point setting for chev 350 v8 engine Use dwell meter to set the gap to 30 degrees dwell.
30 degrees dwell
22 degrees