The Easiest way to drain the radiator on your 97 Lincoln is to loosen the drain valve on the bottom (Drivers Side) of the radiator. Make sure the engine is cool, or take precaution not to burn yourself with hot water. Be sure and loosen to radiator overflow tank cap to allow air to enter as the fluid drains. If you are preparing to flush the cooling system, and replace the coolant, you should also replace the thermostat
You have to pull the lower radiator hose to drain/flush the radiator
Drain the radiator. Leaving the drain plug open, run water from a hose into the radiator and continue to flush until the out coming water is clear.
is there a drain plug on the radiator
In order to flush the radiator you will need to remove the lower tray to access the hose. Unscrew the drain plug attached to the hose and let the radiator drain.
there is no lower radiator hose.
If you do not have a radiator cap once you drain the radiator, you can use several options to flush the cooling system. You can easily do this by filling up the system with as much water as you can and then warm it up.Ê
i have a 95, and i had to just remove the bottom radiator hose to drain and flush.
drain radiator poor in flush and follow instructions on bottle of flush.
The radiator drain plug for a Kia Sedona is located at the bottom of the radiator. The radiator flush that is needed can be purchased at any auto parts store.
There is a drain valve at the bottom of the radiator and you will have to remove the drain bolt in the engine block.
remove bottom radiator hose to drain system. flush system a few time before adding antifreeze.
Drain plug is called a pepcock. it is located at the bottom of the tank part of the radiator. To fully flush a radiator, you need to buy a flush kit. You can get it at any auto store. instructions are in the package.