0
Excess water (over hydration) causes weak concrete. The water in concrete is there to start a chemical process which results in the hardening process. The excess water is not used in the chemical process and results in a weakened concrete.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Does the amount of water in a gravel based concrete depends on how fast it will harden?
yes, because after casting, concrete will get its 90% strength within 28 days and proper hydration require the proper amount of water for atleast 28 days.
What is the purpose of adding a curing compound to the concrete?
Curing is necessary for freshly cast concrete in order to maintain the moisture as the chemical constituents in cement react with water and heat evolves continuously until the setting process completes. The heat evolved during the setting of concrete is called heat of hydration, and this heat causes the water to evaporate. Proper and complete setting process is the most important phenomenon that imparts the desired strength to the concrete. If the freshly cast concrete is not cured, it develops cracks and also the chemical reactions will cease resulting in bad concrete.
What is tensile strength of concrete?
The tensile strength of concrete is 10% of it's compressive strength.
How does the moisture affect the strength values of concrete?
the moisture of concrete is main strength for reinforced concrete structure
How to prevent flash set OF CONCRETE?
You can add citric acid and sugar to stop hydration. But then the concrete is unusable and you need to throw it away.
Meaning of hydration in concrete?
Hydration in concrete provides the means with which to mix Portland cement and the aggregates.
What effect has the quantity of mixing water have upon the quality of concrete?
the strength of concrete is effected by water /cement ratio as the water/cement ratio increases the strength of the concrete decreases
What is curing of concrete?
The curing of concrete is a reaction between the type of cement in the concrete and the water. This reaction between cement and water is known as hydration. When the concrete sets and gains strength through this process it is known as curing. Test cylinders of concrete for construction projects are placed in a curing room where they are continuous misted with water at 23 +-2 degrees Celsius for 7 and 28 days before testing. This provides adequate curing.
What is hydration of concrete?
i do not know, you consider median.
What can effect the strength of concrete?
The water/concrete ratio, not mixing it well enough, quality of raw materials, the age of the concrete, and the temperature and humidity of the area surrounding the concrete.
Does the amount of water in a gravel based concrete depends on how fast it will harden?
yes, because after casting, concrete will get its 90% strength within 28 days and proper hydration require the proper amount of water for atleast 28 days.
Concrete cure time?
In anarid region, concrete placed as a road slab or roof slab gets dried up in a very short time, say within 2 hours.This condition should be maintained for 24 hours or at least till the final setting time of cement at which duration the concrete will haveassumed the finalvolume.Normally curing is done for 28days at 90% of strength gain is achievedUntil maximum design strength is achieved (should be 28 days): Concrete does not gain strength by "Drying out". It gains it through a process known as hydration. The road slabs used as an example in the first post will still undergo hydration once water makes contact with the concrete. (rain). k.k
What is the strength of steel reinforced concrete?
The reinforcment will have little or no effect on compressive strength. It will however impact tensile strength. It depends on the concrete mix design and amount of reinforcment, what the tensile strength impacts will be. The question needs to be a lot more detailed to provide a specific answer.
What is the effect of compaction and curing on the durability of concrete?
proper compaction and proper curing of the concrete gives good concrete. for compaction, it lessen the air voids or micro space between the aggregates of the concrete, those voids are very little which is not really visible. for curing, it lessen the heat of hydration of the cement.
What is tensile strength of concrete?
The tensile strength of concrete is 10% of it's compressive strength.
What is the purpose of adding a curing compound to the concrete?
Curing is necessary for freshly cast concrete in order to maintain the moisture as the chemical constituents in cement react with water and heat evolves continuously until the setting process completes. The heat evolved during the setting of concrete is called heat of hydration, and this heat causes the water to evaporate. Proper and complete setting process is the most important phenomenon that imparts the desired strength to the concrete. If the freshly cast concrete is not cured, it develops cracks and also the chemical reactions will cease resulting in bad concrete.
What would be the effect of a concrete beam if the cover provided becomes more than specified?
strength will be reduced
