Want this question answered?
A standard oscilloscope is designed to measure voltage, you need a current probe for your oscilloscope to measure current.
Thats the linear range of the probe
Because there is no potential difference (voltage) between your hands. You can observe that easily if you have a voltmeter: Hold one probe in each hand, and read the voltage between your hands. The current in the wire is (voltage between the ends of the wire) divided by (resistance of the wire). If voltage=0, then current=0.
One can purchase a current probe from the tek website. One can also purchase the current probe from Amazon. One can use the current probe to measure circuit.
The device is used to detect the presence or absence of voltage prior to working on a circuit. The red test probe is placed in contact with the "hot" wire and the black probe is placed in contact with the ground wire. If there is current, the neon bulb will glow and a solenoid will "buzz". The K-60 identifies both AC and DC current.
Electric current can flow in one of two directions in a wire; with alternating current, the direction changes continually, back and forth. The use of positive and negative values for voltage gives you a direction for the voltage. If current flowing to the right is positive, then current flowing to the left is negative.============================Answer #2:A negative reading indicates that the point to which the positive probe ofthe voltmeter is connected is at a lower potential than the point to whichthe negative meter probe is connected. It tells nothing about the circuitconditions except in combination with the knowledge of how the meteris connected.
To measure high voltage use suitable instrument transformer (potential transformer) Very carefully. It can kill you. The higher the voltage the more the danger or arcing over even when two conductors are not touching. Voltage meters are rated and the rating should not be exceeded. Depending on the voltage you will need the proper meter and a high voltage probe rated for the voltage you are measuring. If you don't know what you are doing, don't mess with high voltage. Leave to the pros.
No, they are completely different motors with different wiring harnesses, motor mount positions and transmissions.
high voltage probe
high voltage probe
The voltage regulator is on the alternator. It is all one piece.
the Mazda 626 and the Mazda rx7 are interchangeble.