In double cage and deep bar the tarting torque increases due to skin effect in the rotor wire. So the rotor circuit draw less current than simple circuit that draw around 7-8 times the rated current on starting.
Due to skin effect the rotor resistance increases and it provide maximum torque at low speed.
As the number of poles (P) increases, the speed of an induction motor (N) decreases. As seen by the formula: N=(120*f)/P
secret......... They are proportional..
deep bars in the rotor that result in higher rotor resistance at low speeds thus resulting in larger starting torques. The higher resistance is due to the skin effect.
What effect will be there on the motor (Induction) output power when a 100kW 50hz motor is connected to a 60hz power supply.
Vacuum is generated by using Ejectors. 1. steam jet ejectors 2. water jet ejectors. may be single, double or 3 effect.
induction effect
Styrofoam
Cellular induction is a technique of producing specific morphogenetic effect in the developing embryo. This process uses the influence of evocators or organizers.
I came to this conclusion using inductive reasoning. The inductive effect by the wire can create a static charge in the metal case.
An induction motor has a lagging power factor. Motors of more than about 2 HP are designed to have a power factor of 0.85 or higher.
As the number of poles (P) increases, the speed of an induction motor (N) decreases. As seen by the formula: N=(120*f)/P
when the current flow through primary coil an electromotive force generated to secondary coil in the direction that prevent the magnetic flux in the primary coil is called mutual induction.
secret......... They are proportional..
St Thomas Aqinas Devised the doctrine of Double effect
Double Summon's effect is only active during the turn in which you activate it.
Torque is the cross product of radius and force .Torque is a twisting effect. Torque is the cross product of radius and force .Torque is a twisting effect.
due to the finite length of primary core and windings of linear induction motor, the phenomenon so produced is called as end effect. this can be categorized further as dynamic end effects and exit end effects.