Transmission line efficiency is power at the recieving-end of the line compared to the power at the sending-end of the line and is expressed as a percentage, so this can be formulated.
% efficiency = load power (output) / source power (input) x 100
In the line, there are power losses. to calculate this we use the formula:
power loss = 3.I2.R where I is current and R is resistance.
Now that we have the losses, we know the difference between the input and the output. So, for example, if one had the output value known, then to get the input we just add the loss to the output or if had the input known, just subtract the loss from it to get the output.
hope that helps
Transmission voltages are in multiples of 11 to allow for 10% transmission line losses. Therefore, to obtain 100% efficiency, voltages in multiples of 11 are transmitted.
pg clamp is known for parallel groove clamp,especially used in transmission line to hold transmission conductors in parallel.
Transmission and distribution voltages are normally expressed in terms of line voltages, so the answer is that the figure you quote is a line voltage. Incidentally, do you really mean 230 megavolts for a transmission voltage?? And the symbol of kilovolt is 'kV', not 'kv'.
coaxial cable
theriyathu
capacitance grading method,static shielding
Transmission voltages are in multiples of 11 to allow for 10% transmission line losses. Therefore, to obtain 100% efficiency, voltages in multiples of 11 are transmitted.
Usage of such high voltages will increase the efficiency of the transmission lines and decreases the losses in the line. It also reduces the requirement of conductor size.
A clutch in an automatic transmission will decrease fuel economy. A clutch in a manual transmission will increase fuel efficiency.
In Networking It means the transmission of data from one computer to the other with minimum or no errors
The effect of a cracked diaphram in transmission is that it reduces the efficiency of the system.
how to fix a transmission without taking it a part how to fix a transmission line
Packets
packets
Only if it is a DC transmission line.
If this vehicle has a transmission cooler then it will have one line to the cooler then another for the return line to the transmission.
B. Efficiency is increased.