Want this question answered?
Remove the tire and wheel from your 1994 Mercury Cougar. Remove the brake spring and brake caliper. The brake shoes will come off.
To replace the brake pads on a Mercury Mariner you will need a few tools. The tools you will need are a large C-clamp, a jack, tire blocks, and a 3/8 inch hex head Allen head socket.
First,disconnect the battery.Remove tire.Set jack stands on frame not control arm you will be removing the steering knuckle for this job.Remove inner fender well.Remove brake caliper,brake caliper mounting bracket,rotor,remove lower balljoint nut,remove knuckle to strut bolts,remove abs sensor from knuckle,seep rate knuckle from lower balljoint
Lift the car, remove the tire, remove the brake shoe/caliper, and remove the old brake pads. Put in the new brake pads, replace the brake shoe/caliper, replace the tire, and lower the car.
brake hose is bad
1. Remove the brake hose to caliper bolt from the brake caliper. 2. Remove the brake hose from the brake caliper. 3. Remove and discard the 2 copper brake hose gaskets. These gaskets may be stuck to the brake caliper and/or the brake hose end. 4. Cap or plug the opening in the brake caliper and the brake hose to prevent fluid loss and contamination. 5. Remove the 2 brake caliper pin bolts. Remove the park brake cable from the caliper. 6. Remove the brake caliper from the brake caliper bracket.
Remove the two slider screws that hold it in place.
The teves caliper is a single piston disc brake caliper and the akebono caliper is a dual piston disc brake caliper. The teves caliper is a single piston disc brake caliper and the akebono caliper is a dual piston disc brake caliper.
how do you get the brake caliper push in to put new brake on
18-25 ft lbs.
Quote from the dealer is $450.00 per axle, rotors and pads.
Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper In my opinion you have to change front lower arms' bushings.