To replace the brake pads on a Mercury Mariner you will need a few tools. The tools you will need are a large C-clamp, a jack, tire blocks, and a 3/8 inch hex head Allen head socket.
7mm, you might need a socket extension to get the head of a ratchet past the brake line.
9mm hex socket bit
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.
You do not need a scan tool to replace any brake pads. The wear is obvious.
when needing brakes do you have to replace the rotors to on a s60r
you probally need to replace the bulbs
need diagram of rear brake lines for 1993 mercury topaz
The tools you would need to replace front brake pads are, a wrenche (size varies depending on vehicle type), a clamp tool, and brake pads.
measure affected line
This is something you would be well advised to buy a manual for, as it is a complex operation, and you'll need illustrations if you're not familiar with working on brake systems.
Yes. Brake fluid sucks up moisture like a sponge.
you need to replace the brake light switch that is located above the brake pedal underneath the dasboard Here's a link to a video that 1aauto.com has that shows you how to replace the brake light switch.