Per: the 'Haynes Repair Manua;'
Intake: 0.003 > 0.005 inch.
Exhaust: 0.006 > 0.008 inch.
From the HAYNES REPAIR MANUAL: Valve Clearance (engine COLD) - Intake: 0.003 to 0.005 inch. Exhaust: 0.006 to 0.008 inch.
Intake: 0.003 > 0.005 inch Exhaust: 0.006 > 0.008 inch. Information per: Haynes Repair Manual.
Valve clearance for a Honda GC160 engine; Inlet 0.15 +/- 0.04mm Exhaust is 0.20 +/- 0.04mm
K20A3 engine Intake: 0.21-0.25 mm (0.008-0.010 in.) Exhaust: 0.28-0.32 mm (0.011-0.013 in.) K20A2 engine Intake:0.21-0.25 mm (0.008-0.010 in.) Exhaust: 0.25-0.29 mm (0.010-0.011 in.)
if its h22a engine intake are 0.15-0.19mm (0.006-0.007in) ,exhaust 0.17-0.21(0.007-0.008) At the factory we set the tappet clearance to 200 microns plus or minus 20 microns. This applies to all L4 and V6 engines. The Prelude is built in Japan, but I would assume that the settings are the same.
No, this is an interference engine. You will have severe engine damage if the belt breaks.
.006" intake, .009" exhaust. Adjusted with engine cold.
"What is the valve clearance on 1992 Honda accord?"
Valve lashes only need to be done when the valve piston clearance inside the engine is off. Factory service manuals will list the appropriate clearance levels for the 2003 Honda Accord.
The ground clearance of the 2004 Honda Pilot is 0 ft. 8 in. (8 in.).
VALVE CLEARANCE FOR A 2000 HONDA CIVIC EX 2 DOOR
The ground clearance of the 2011 Honda Ridgeline is 0 ft. 8.2 in. (8.2 in.).