It depends on what shower head you have. It is not an exact answer.
ANS 2 - The average shower head has a restrictor limiting it to about 2gpm. These can be removed and then you would get about 3 gpm.
the ratio of the distillate mass flow rate to the mass flow rate of the steam used
A Flow Transducer is also known as a flow senser. A flow senser is used to sense the flow rate a fluid flows or flow logger to record the flow of the fluids that run through them.
As per naffco, the flow rate for the landing valve is maximised to 10.0 lps at the pressure of 4.7 kgf/cm...thanks
Current is the flow of electric charge or the rate of the flow of an electric charge through a conductor.
if you connect the pumps in series, it will add head at the same flow rate. Inversely, in parallel connection, double the flow rate at same head.
This would depend on several factors. The savings could be calculated by comparing the flow rate difference between the old and new showerhead. Take this difference and multiply it by the amount of time the shower is on in a given week, month, or year to see how many gallons (or liters) you would save.
You might have a pulsating showerhead?
An average north American showerhead will allow about 2 gpm to flow. This is about 16 cups per minute.
As the rate of flow decreases, the rate of deposition increases
The barcelona White Finish Showerhead has 3 settings.
Viscosity is the term.
The relationship between radius and fluid flow rate is inversely proportional. As radius goes down, fluid flow rate goes up. The highest fluid flow rate will be at the lowest radius.
Viscosity is a substances resistance to flow. So as the viscosity of a substance increases, the flow rate will decrease.
Flow rate= radius to the fourth power
High viscosity lead to a low flow rate and inverse.
The FRI, or Flow Rate Index is a rating system for the flow rate of solids. Air and air pressure measurement connections are part of the testing apparatus.
Static pressure certainly does affect flow rate. Static pressure can slow or speed up flow rate based on the liquid.