Want this question answered?
Abs to PVC glue sold at home depot Color it aqua blue/green plumbers key term. GUMBY GLUE Depends upon what you mean by "black pipe". If you mean ABS drain pipe, there is glue for that. If you mean steel "black pipe", i.e., non-galvanized, then you would need a threaded connection adapted to the PVC (either a female PVC connector on a male black pipe or a male PVC connector into a female black pipe fitting). The secondary question would be, "Why would anyone want do to that?"
No, there is no suitable adhesive. These must both have threaded endings and be mechanically attached or use something like a 'Sharkbite'
Remove the trap and clean it out. If it is all PVC and glue jointed, cut the pipe above and below the trap, clean it out and glue it back together with couplings.
Yes
With a PVC locator
ABS yellow glue is the correct glue for ABS pipe. The only other glue to consider is Weld On Transition cement if you are gluing ABS to PVC parts.
The best is Weld On 711 when used with purple primer.
PVc glue is a specialised item for gluing PVC pipe, with a primer. It MAY glue other household items, but test first and don't expect too much. It's not made for 'other items'
its glue spicily for pvc pipe only
I don't understand why you'd want to do that . CPVC glue is expensive, PVC glue is cheap and glues PVC pipe better.
if your waste pipe is PVC and your glue is for PVC . yes! but make sure to use a primer(cleaner) on the pipe first.
No.. it does not work.. I have tried it on a piece of card (120 gsm)..
It is a type of glue used for gluing pipes together... (not the type of cement in concrete).
get a coupling and the fitting that needs replaced. cut out the pipe that is leaking and reeplace it. use plenty of glue and primer. hold the fittings together for at least 1 minute after gluing.
NO, PVC is very sensitive to which glue is used. In Domestic pipe applications you should use Weld-On 711
Abs to PVC glue sold at home depot Color it aqua blue/green plumbers key term. GUMBY GLUE Depends upon what you mean by "black pipe". If you mean ABS drain pipe, there is glue for that. If you mean steel "black pipe", i.e., non-galvanized, then you would need a threaded connection adapted to the PVC (either a female PVC connector on a male black pipe or a male PVC connector into a female black pipe fitting). The secondary question would be, "Why would anyone want do to that?"
A PVC pipe glue will take at least 4 hours to dry. 12 hours before putting water pressure in it.