Want this question answered?
Replacement oil filter for Hydro-Gear Oil filter #52114 such as Fram , A C or other equivalent Filters .ThanksRedrider1934
Cross reference hydro-gear filter number 52114
The filter is on the suction side of the pump if you look at the hydraulic schematic, and the sump (case) of the 2800,3100 and 3400 series units is vented through the plastic expansion tanks. Thus the pressure on the filter is atmospheric (or a slightly less). To put it simply, the pump draws oil through the filter rather then pushes it so there is no pressure in the filter.
go to mowmore.com - hydro gear # hg52114, scag hg521114, exmark 109-3321, or hydro gear hg12374
10w-50
John Deere recommends that you put Low Viscosity Hy-Gard or Hy-Gard Transmission oil in their Hydro or Gear Transmissions. The Low-Vis is used for factory fill in the Hydro and Hy-Gard in the Gear Transmission.
yes this is the best thing!
No
Strictly the transmission is "hydro driven" on a Kubota BX-series tractor. It is has a high and low range but speed is fully adjustable and controlled by a variable swashplate in the transmission. The mid and rear PTO's are gear driven by a wet hydraulic clutch pack. FWD is strictly gear driven from inside the transmission. Hope this helps.
check gear shift linkage if transmission is bad
Could be a plugged fuel filter, or a plugged air filter, or a plugged catalytic converter.
check for vacuum leak or dirty fuel filter