Want this question answered?
front ones twist and pull
Actually the nut does not hold the rotor on. Your brake caliper does that. The nut holds the front hub on. correct and the torque setting for the front hub nut is ..284 ft pounds
It is 46 lbf-ft.
The setting would be around 7 route in order to have a correct setting of axle.
front hub 120nm i think
192 lbft
185 ft.lbs/251 nm
The front wheel bearing torque setting on a Renault Clio ranges between 112 to 174 ft lbs. One needs to use a 30 mm socket on a 1 inch air gun to loosen the nut.
290 nm front wheel bearing 1.7 puma
how do i change the front bumper on my 1999 vauxhall vetra
Front wheel bearings are pressed in using a hydraulic press, no torque setting. However, the wheel hub retaining/axle nut that you need to remove and replace in order to change out the bearing needs to be torqued down to 233 ft-lb.
located at the front of the car