To overcome the sparking at brushes.
because obama
if you power an ac motor with dc or a dc motor with ac you will likely start smelling smoke and the motor will be damaged. If the motor is marked "3-phase", "shaded pole", or "induction" it is an ac motor! BTW, there are ac/dc motors that will run on both, they are wound very much like dc motors but a bit differently.
Conversion of electrical energy into mechanical energy
G(s)= θ ̇/V= k/(Ts+1)
DC Voltage
5V dc motor is the best for the robotics materials and it is inexpensive as compared to the other motors. dc motor is made up of the magnetic coils consist north and south pole
because obama
2
if you power an ac motor with dc or a dc motor with ac you will likely start smelling smoke and the motor will be damaged. If the motor is marked "3-phase", "shaded pole", or "induction" it is an ac motor! BTW, there are ac/dc motors that will run on both, they are wound very much like dc motors but a bit differently.
On an AC motor you basically vary the frequency on a DC you can vary the voltage.
Conversion of electrical energy into mechanical energy
Shunt motor is used. For constant speed ,torque will high when load is increased
the gear motor is normally worked by induction and DC motor the gears is the worked of change in motor function
the mechanical force needed to start the motor (move one pole to another) is greater at rest. once forward motion is developed it is easier for one pole to get to the next
when the pole flux is zero there is no induced emf in the armature conductor of dc machine as a result of this there is no back emf for controlling action so speed become dangerously high or we can say it will be infinite.
yes ,but it need good function geat system and high watt dc motors
G(s)= θ ̇/V= k/(Ts+1)