To turn Torx screws.
To turn Torx screws.
With a T20 torx screw driver. It is held on by one screw.With a T20 torx screw driver. It is held on by one screw.
A torx driver for 1998 Dakota tail light would be size 3157. It is really easy to put in. 3157 would be the bulb size/number. The Torx driver would be a number 15 or 20.
apex.
T-6
torx
A flat head screw driver will work if you wedge it in between the security pin and the outside. if it doesnt have the pin, just use a flat head normallyANS 2 -There is NO good substitute for a Torx driver. -That is precisely why they make them. Using other tools on torx bolts will inevitably ruin the bolt head
Behind the driver side fog light grill. If you have no fog lights its under the grill at the lower front driver side of the car. To pull grill you will need to undo one 20 torx bit. Not 100% sure on the size but I do think the torx was lower than 25
Put your tailgate down and take the screws off on the inside of the taillight. The screws are Torx screws, so you will need Torx head screw driver. Then just give it a tug and the cover will pop right off. You will be able to change out the bulb.Note: Torx srews are different from Philips or flat-head screws so they require a Torx screw driver which has a star-shaped head.
TORX T-15
Torx bit screwdriver size T10