Want this question answered?
Push the button that says "HOLD" next to your shift knob.
it allows you to hold a particular gear thereby avoiding any unwanted gear changes
Button on the shifter.
holds it in that perticular gear.
It means you have pressed the power/normal button near the shifter,when the power light is activated the truck will hold the gears longer at a higher RPM before shifting ,good for towing.
Check that the overdrive button on the gear shifter is not disengaged that will cause it to come on.
It allows the transmission to be HELD in one gear, longer than normal. Once you release the HOLD button the trans will shift normally. A HOLD button, keeps the transmission either in a gear or in a range of gears, according to a moderately complicated algorithm which "lets you shift for yourself."
On my 2002 suzuki grand vitara I set the clock by pressing and holding the *disp* button to the right of the *<<* *>>* arrows( located at the right middle area of the stereo). Hold the disp button and push the << button to set the hours and >> button to set the minutes.
push foot down on brake pedal, hold in button on gear shifter and pull down
15gal. Actually 14 gallons. 12 primary and 2 preserve. Once you hit past the 12 gallon, you get a fill up light warning on your dash.
You have two lights on dashboard which are linked to your auto transmission, 1. POWER which will hold the gears for a longer period during going up in gears for higher accelaration, and 2. HOLD when climbing hills or overtaking the hold button will drop down a gear and maintain that gear until button is released, just helps to maintain gear and accelaration instead of the gear dropping halfway through overtaking or climbing. Both of these buttons are on your shifter, Hold, on side of shifter at top and Power will be a button left hand side of base plate. Hope this helps, Iain.
The hold light refers to the hold button on the shifter module. It means the transmission holds the lower gear revving up the rpms and won't shift to the higher gear. Seeing the light means the button has been engaged. Push it to turn it off