A structure in a hollow organ (like the heart) with a flap to insure one-way flow of fluid through it
No, you do not have to remove the engine to do a valve job.
Do a valve job. This is more complicated than it sounds, you might be better off sending the head to your local machine shop for the valve job.
Pcv valve job on 95 civic
The area where a valve closes in the combustion chamber of a four-stroke engine is called the valve seat. During a valve job, this seat is ground at a set angle, usually 45 degrees, for a good seal. In a three-angle valve job, additional angles are ground into each side of the seat angle to ease the transition and improve flow.
A valve job for your vehicle will typically cost about $300.00. However, it generally depends on whether you have a 4 cylinder or a 6 cylinder.
to inject oil into the valve timing controller assembly
its all about blood flow blod
$1,000 to $1300
No. every valve has a job to do, a diffrent area to export blood to:)
It is normal to replace them.It is normal to replace them.
A valve job for your 1999 GMC Suburban will cost approximately $800. The parts will cost around $200 and require 10 hours of labor.
The aortic valve does that job.