an wiper in a ship is a person whose main job is to clean the engineer's room and assisting the engineer
hudhuirh
I think it is time to replace the wiper blades, when your wiper not doing the cleaning job well and make squeaking sound, also it is dangerous to drive without the proper wiper to clear the windshield.
The look out job is to look out for pitates and storms.
A place where you can go to get a car's windshield wiper replaced is by either taking it to a mechanic or you can get the job done yourself. Just by simple buying a set of replacement wiper blades and removing the old ones.
Remove the plastic cover under the hood by the wipers. Underneath is the wiper motor and linkages. On a scale of 1 to 10 for a mechanic it is about a #2 job (10 being the hardest).
if the wiper motor works when you operate the switch then the switch is doing its job the most likel cause of your problem is the wiper armature came loose and needs to be fixed or somethings hung up you need to take the wiper arm assemblys off pull the cowl off and investigate it if you have anymore problems email me at dbertke@cinci.rr.com
First step is to make sure you get the right special rear wiper blade - once you do that, its literally a 1-minute job - a twist and a snap. See related links below.
I have a 1983 bronco full size and I had to replace my wiper motor. I had to remove the wiper blades and arms then I had to remove the cowl. once you remove the cowl it is pretty much straight forward from there it took me by myself about 3 hours to do this job. oh yah make sure you time the wiper arms before turning them on to try them. Hope this helps. Have a nice day
The answer is your artery. It's job is to take blood away from the heart.Arteries
Difficulty: Easy== * Chevy Impala wiper blade replacement kit Step1 Pull the windshield wiper arm connector up. Note that, unlike other models, the Impala's wiper arms will not stand on their own. This job will require both hands.Step2 Raise the clip from the blade connecting point. On the wiper arm, you'll notice a small clip on the back side of the wiper arm. Simply pull it up with your fingers while you continue to hold the wiper arm.Step3 Slide the blade assembly down toward the windshield until you have removed the old wiper blade. At this point, you can discard the old wiper blade.Step4 Put the new wiper blade on the wiper arm by sliding it along the wiper arm track until it lines up with the clip. (At this point, you're still holding the clip so that it is raised.)Step5 Fasten the clip back into place by releasing it and making sure that it fits securely on the wiper blade.Step6 Repeat this process on the other wiper blade arm to complete the replacement of the wiper blades on your Chevy Impala.GOOD LUCK
It is under the wiper arms.It is under the wiper arms.