Want this question answered?
A system control cable is a cable attached between the Kenwood main receiver and a Kenwood component (ie. CD player, tape deck) to provide automatic operation of the component when the associated button is pressed on the receiver or its remote.
Yes, most of the Car CD Players produced by Kenwood feature remotes as well. Check out the Kenwood KCA R70FM Car CD changer /satellite radio remote control.
Unlock code for kenwood sterio y21543010
ON MOST KENWOOD CD PLAYERS YOU CAN ENTER THE CODE WITH THE REMOTE USING THE NUMBERS LIKE A TELEPHONE 2 IS FOR A,B,C 3 IS FOR D,E,F ETC. THERE IS A UNIVERSAL KENWOOD CODE THAT IS "KCAR"
Can I change my remote control receiver
if you dont have a remote for your unit you need to get one. Once you have the remote type in this code. 55222277. The unit wont look like its doing anything at first, but it should work.
Remote Control Door Lock Receiver
You cannot program a Direct TV receiver with this remote. The Toshiba TV this was designed for was introduced before the Direct TV HD systems came out. This remote does not control any model of DVR. If you want to control both of these with one remote, get a Logitech Harmony remote.
Red - +12v Ignition/Switched Yellow - +12v Battery/Constant Black - Chassis Ground Blue - Power Amplifier Blue/White - Power Amplifier Remote +++++++++++SPEAKERS+++++++++++ Green - LR+ Green/Black - LR- Violet - RR+ Violet/Black - RR- White - LF+ White/Black - LF- Grey - RF+ Grey/Black - RF-
The wiring harness can be purchased from partsstore.com or a Kenwood Parts Distributor (1-800-421-5080) for $19.62. If you're missing the wired remote you're in more expensive trouble. It cost around $94.16 to replace and in my opinion is way too expensive to replace when a complete subwoofer with accessories can be ordered for less off of ebay. Good Luck!
The door lock remote control receiver for a 1997 Chevy Astro van is located inside the cabin. it is found on the right kick plate.
You cannot control your Sony Receiver with your Sharp TV remote. Sharp remotes can control many brands of DVD and Blu-Ray players, but only Sharp receivers. You should program your Sony receiver's remote to control your TV instead. How you do this is outlined in your owners' manual.