Distributors and Distributor Caps
Dodge Ram

What is the location of the number one cylinder and number one distributor for a 1985 Dodge Ram 350 Van?

858687

Top Answer
User Avatar
Wiki User
Answered
2004-09-17 21:37:57
2004-09-17 21:37:57

look on your intake manifold each cyl.has a num.above it.near the frunt of the manifold is your fireing order.bring #1 to t.d.c.(top-dead-center)the rotor button is at #1.cap should be marked.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


The number one cylinder for the 2.7 Dodge engine on the passenger side. It is the cylinder closest to the front of the engine.

On the 2.5 L it is on the end of the rear cylinder head.The 2.4L does not have a distributor.On the 2.5 L it is on the end of the rear cylinder head.The 2.4L does not have a distributor.

4 cylinder it is on the end of the head. 6 cylinder it is in the distributor.

Inside the distributor on my 94 B250 is a plastic piece that covers the bottom of the distributor. Ihas a wire coming out of it. On it, it has a mark and says number one cylinder, or something like that. But it is there.

The firing order for all Dodge truck 4 cylinder engines is 1-3-4-2 and the distributor rotates clockwise.

165432 is the firing order for my 1989 Dodge Ram Truck, but what is the rotation of the distributor (clockwise?) and location of number one plug?

A Dodge Neon does not have a distributor.A Dodge Neon does not have a distributor.

Four cylinder engines, do not have one. Six cylinder, it is on the driver side end of the rear cylinder head.

in what order are the spark plug wires on the distributor cap on a 1998 dodge Dakota 6 cylinder

Number one cylinder is the front passenger side in a V6 Dodge Magnum.

firewall 8 - 7 6 - 5 4 - 3 2 - 1 front ( on a Dodge V8 engine )

The marked # 1 position on the distributor cap faces to the FRONT and center of the engine

Back of the block, behind the intake manifold.

Should be under the distributor cap

There should be a mark on the distributor or it's switch plate that indicates where the rotor should point for cylinder 1. If you look at the distributor from the front of the vehicle, the closest center position should be for cylinder 2. Clockwise 1/8 th turn from that should be cylinder 1 position, but double check against the indicator mark that should be present.

# 1 on the distributor cap faces to the FRONT / CENTER

A Dodge Neon does not have a distributor.

Back of the engine, next to the distributor.

That would be the pick up plate in the distributor.

Dodge V8 engine cylinders are numbered : firewall 8 - 7 6 - 5 4 - 3 2 - 1 front

The #1 plug wire is on the front left next to the intake bolt. The firing order (clockwise) is 18436572.

A Dodge Neon does not have a distributor.

1,8,4,3,6,5,7,2 number 1 cylinder is driver side most forward cylinder distributor rotation isclock wise spark plug gap 0.035 inch hope this helps


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.