Want this question answered?
If you plug it it in, if it doesn't light it's the wrong way round. Although these other two are more 'conventional': -The negative wire is closest to a small flat 'spot' on the LED's base. -The longer leg is the positive wire
This is the part of the leg called the thigh.
Because you are no longer vertically symmetrical - vertical symmetry is required for balance
The have two leg sides,.......which is combined into a "pair" !
The longer legs you have,the bigger the strides you take, the less strides you need to take to go fast, the less energy you need to use.
annode
annode
Current will only flow one way through an LED, so it has a positive leg and a negative leg. One of them is longer to signify which is which (longer is negative). The negative side also has a chamfered edge on the LED itself.
If you plug it it in, if it doesn't light it's the wrong way round. Although these other two are more 'conventional': -The negative wire is closest to a small flat 'spot' on the LED's base. -The longer leg is the positive wire
Cathode (negative) is the shortest leg and there is a flat edge on the base of the LED, and it must be connected to the negative wire or "-" connection. Anode (positive) is the longest leg, and must be connected to the positive wire or "+" connection, as electricity will only pass through a LED from positive to negative.
The longest leg is the positive leg of any LED.
Because if the shorter leg was shorter than the longer leg was long, then the longer leg wouldn't be longer than the shorter leg is short. The short leg would be the longer one rather than the long one being the short one.
The length of the legs. The positive leg is always longer than the negative one.
Cathode and an anodeThey are called the "anode" and the "cathode", just like every other diode ever built.
your leg
L.E.D has one leg longer then the other one, the longer one is positive and the smaller one is negative. If you have a l.e.d which has same length of legs then look inside the l.e.d for two kind of triangle peices and one of them will be smaller which is positive and one which is bigger and is negative.
On an LED, one leg will be shorter than the other. The shorter leg is the negative polarity.