Apples and Oranges. The led quantity, quality and effeciency make all the difference. As far as a 60 volt bulb... How many WATTS?
it varys from light bulb to light bulb.
The correct voltage should be printed on the light bulb.
110 volts is what comes out of an average wall socket in America. A 100-watt bulb would be powered by 110 volts. You need to be more specific in your question to get a good answer. Small can't be measured.
For lighting up a city you need 120 volts in the USA and 230 volts in Europe. It's just the usual voltage the light bulbs are needing.
Okay so I searched for 3 hours on Google and no answer so here it is: 40W - 110C; 60W 140C; 100W 136C; and 100W Flood (Red Green Yellow) 125C. Standard bulb, 117VAC, 60Hz, facing up (edison Base down, free air, 22C ambient, measured with K-type thermocouple, calibrated in last 12 months....
Light bulb are measured in Candela (Cd) for its luminous intensity and Watt for its power consumed.
The luminous radiation emitted by the light bulb.
because it has light
it varys from light bulb to light bulb.
Um, a 5 volt light bulb?
At first light it DOES sound a bit confusing. First, the definition of the term 'NON-LUMINOUS'; 'Not capable of PRODUCING light but can be capable of REFLECTING light from another source'. For instance, our MOON is NON-LUMINOUS as it REFLECTS light from the Sun. The SUN is LUMINOUS as it produces light that is REFLECTED off the surface of the moon. And so, LUMINOUS means capable of PRODUCING light. Now closely examine your flashlight. The BATTERIES produce electrical energy which is transferred to the BULB which emits light, thus LUMINOUS. The tiny little BULB emits quite a lot of light for its small size. However, the bulb is contained within a concave silvered cone which REFLECTS,(NON-LUMINOUS) gathers and channels the emitted light from the BULB (LUMINOUS) into a BEAM which ILLUMINATES whatever you are pointing the flashlight at. Our cameras would be just paperweights if there were no NON-LUMINOUS surfaces for the light to REFLECT off of, back into the camera lens, onto the 'plate' thus etching the image. For example, take a photograph in the dark without the flash and what do you get. No LUMINOUS, no NON-LUMINOUS. And so there we have LUMINOUS and NON-LUMINOUS, ILLUMINATING our lives. Enjoy! :)
Onions don't have volts.
It indicates that the light bulb must be high of voltage trough the current......
A light bulb connected between to wires, each having 300 volts to ground that are in phase, will not light, because there is no differential voltage available to do any work. If each wire has 300 volts to ground and are out of phase (600 volts between them) the light bulb will be lit, if it is rated at least for 600 volts, otherwise it will burn out.
Luminous intensity is measured in Candelas. If a light source emits one candela of luminous intensity uniformly across a solid angle of one steradian, its total luminous flux emitted into that angle is one lumen. Alternatively, an isotropic one-candela light source emits a total luminous flux of exactly 4π lumens. The lumen can be thought of casually as a measure of the total "amount" of visible light in some defined beam or angle, or emitted from some source. A standard North American 100 watt incandescent light bulb emits 1500-1700 lumens,[1] while a standard European 230 V model emits 1200-1400 lm.[2] A 100 watt high-pressure sodium vapor lamp emits around 15,000 lumens.[3] The number of lumens produced per watt of power consumed is the wall-plug luminous efficacy of the source.
The correct voltage should be printed on the light bulb.
luminous flames are those which throw or Emmit bright light of great intensity......but non luminous flames are those which just glow and do not emmit light of such great intensity................ it should not be misunderstood with candle ......and coal........as one emits flame and the other does knot's as there is no flame......there is no point of luminous or non luminous