centrifuging.
The most simple method is distillation.
Settle it and pour off the water, or simply filter the sand out of the water.
the answer is extraction. represent
You can simply separate salt and water by distillation method.
Filtraton
Evaporation is one of the easier ways.
Filtering is a good method because turmeric is very low soluble in water.
One method to separate oil and water using a machine is by employing a centrifuge. The centrifuge spins the mixture at high speeds, causing the oil and water to separate due to their different densities. The separated layers can then be collected and extracted individually.
Kerosene is an oil therefore it will not mix well with water. The mixture should separate itself when settled. Then you can spoon or siphon the oil off the top of the water. These substances also freeze and boil at different temperatures so that can also be used as a method to separate them.
There are a number of methods that can be used to separate methanol from surfactants. The most effective method is extraction of the cationic surfactants by contracting the mixture with water.
Use a separating funnel since the petrol floats above the water.Just let the mixture stand. Petrol and water are not soluble, so they willeventually separate. Since the petrol is lighter than the water, it will forma layer on top, and may be drawn off.Petrol will form at the top of water as it is not as heavy.Apart from this I do not know what industrial methods one can use.Petrol will float on top of the water as it is less dense. Therefore, drawing water only from the bottom will reduce the water content in the mixture. It may take distilling to separate the two completely.Petrol will float on top of the water as it is less dense. Therefore, drawing water only from the bottom will reduce the water content in the mixture. It may take distilling to separate the two completely.
Dissolve the mixture in water and filter the residue. It is the silver chloride in the mixture. Now heat the solution to evaporate the water. The remaining solid is glucose.