A peripheral is any component that is not essential to the computer, but provides additional functionality. The essential components are the motherboard, CPU and RAM, along with a data storage facility (e.g., hard-drive) containing an operating system (the essential software).
External input and output devices (such as keyboard and screen), while often essential, are actually peripheral devices (routers and servers do not require them as they are accessed remotely via a network computer). The screen, if required, will also require a graphics processor, which is usually built into the motherboard itself, or is provided as a peripheral expansion card attached to the motherboard via expansion slots (such as PCI and PCI express slots). In a multi-monitor setup, both types can be used together to support 4 or even 6 separate monitors.
As to how you physically connect peripherals, every connection in the computer (both internal and external) is keyed; it's impossible to get the connection the wrong way around by accident. So if a plug won't fit into a socket, check it is oriented correctly and that it is the correct type of socket. Firewire and USB connections may look very similar at first glance but, if you look more closely, they are very different indeed. However, some connections rely upon an interference fit that require gentle but firm (not excessive) force to make the connection good. Above all, ensure all connections are fully-seated into their sockets, and locked into place wherever a latch is provided (the CPU and RAM use latches, as do SATA hard-drives and PCI express devices).
When attaching components (including CPU and RAM) to the motherboard, the board may flex and crack if too much force is applied. The motherboard stands on small stand-off pegs fitted to the chassis. While some flexing is to be expected, do try and support the edges of the board with your fingers to minimise this flexing. If this is not possible, you may have to remove the motherboard completely and place additional stand-off pegs wherever required (to match the available screw holes of the motherboard itself). If you cannot place a metal stand-off under the board at a particular point (because the chassis doesn't provide a threaded hold at that point), then you can use a plastic stand-off that clips into the motherboard's screw hole and simply sits on the chassis to provide support. This is often required at one of the four corners of the board, especially with budget chassis.
Read the devices manual or research how to install it on the internet. There is no specific answer for this question. It depends on the device you are wanting to install how it should be installed.
Often times a device is USB. So plugging it into a USB port should make it work. Firewire will the the same setup. If it has an external power supply, don't forget to hook it up as well.
If the device is a PCI card/RAM/Hard Drive/CPU, you will have to open your PC case, shut off the power and unhook any power cables hooked directly to the motherboard. Wait 60 seconds for the power to dissipate. And follow the manufacture instructions on installing it.
Always follow valid manufacture instructions to prevent damaging components or other parts of your computer.
Some devices, graphic card and sound card, etc, for instance, are usually slotted on to the motherboard inside the tower. External devices, printers, keyboard, mouse, monitor, speakers, and so on, are usually plugged mainly into USB ports nowadays. Older devices may need plugging into a parallel or serial port.
i think by a port.
im doing computer homework and im not positive if that's the answer but i think so
There is usually a row of sockets on the side of a laptop, or a set of sockets at the back of a tower.
The wording is very vague. maybe you could be more specific. your question is akin to simply asking how an engine is connected to a car.
inasquarium deleuxe unlock code
A universal serial bus (USB).
by usb or the various connectors
A scanner is the computer peripheral used as an input in an office. Input devices are things you attach to a computer.
Peripheral ports such as COM, USB and serial ports, are input/output interfaces that allow devices to connect to a computer. Expansion slots are sockets on the motherboard where an expansion card is inserted.
operating system
Routers, Switches, Cables, End devices .
Peripheral devices are devices used with a computer. Most think of peripherals as non-essential devices like printers, mice, joysticks, speakers, etc. The exact function depends on the exact peripheral.
A PC card is used to connect peripheral devices to a notebook computer.
bluetooth
By using peripheral devices and the various input ports and sockets.
peripheral devices
Gto enable peripheral devices to connect to a computer. It's designed so that - no matter what the device is - the computer will 'recognise' it.
USB
A scanner is the computer peripheral used as an input in an office. Input devices are things you attach to a computer.
Well, a periphel device is any device that can connect to the outside of a computer system, anything that cannot connect directly to the outside of a computer would be classed as a non peripheral device.
Not all external peripheral devices need a cable. There are a growing number of devices that use wifi (wireless and no cable required). You can use a wifi keyboard and a wifi mouse. There are wifi printers, and so on.
A modem is a peripheral device based on the fact that peripheral devices are devices located on the outside of a computer
A computer peripheral, or peripheral device, is an external object that provides input and output for the computer. Some common input devices include: * joystick * pen tablet * MIDI keyboard * digital camera * video camera
A peripheral is a device attached to a host computer, but not part of it.Some common peripheral devices are keyboards, printers, computer monitors