Want this question answered?
It is called the 'Scuttle panel' or the cowl.
There is a panel under the steering column with 3 screws attached, turn them anticlockwise to loosen them and then remove the panel. The fuse for the wipers is a 15 amp fuse in location 13.
I'm guessing you mean the front wiper here,- you just remove the cover over the nut and unscrew using spanner. make sure its not too loose or it will come off during motion. that's as far as i can help. THE WIPER CONTROL UNIT IS UNDER THE BLACK PANEL UNDER THE WIPERS,, TAKE OFF WIPERS AND BLACK PLASTIC PANEL CONTROL UNIT UNDERNEATH,,,,
Panel
more than likely if you have had a service done on car or windscreen changed the scuttle panel has not been clipped in right the pollen filter is located underneath the scuttle on the passenger side of the car ..water gets in to the filter and seeps through in to the footwell
To remove the poor panel on Vectra the screwdriver that will be used to unscrew the screws. Once the screws have been removed, the door panel on Vectra can then be removed.
The fuse for the wipers in a 2002 Mercedes c240 is located on the fuse panel, that is located on the driver's side engine compartment. The fuse number for the wipers is 46.
It is located under the plastic trim panel just in front of the windscreen
should be 1 on left hand corner of dashboard in corner of window! If you have a vectra B its on the panel in the drivers door a black sticker with white writing
The ECU is located under the Scuttle panel at the base of the windscreen
remove wipers and skuttle panel
Use a screwdriver to remove all the screws and clips in the doors panel. Pull the panel away slowly, remove the wiring connections and the panel will come off easily.