shredder valve.
lug wrench or tire iron are the most popular names.
If you want to remove the tire you will need a tire tool.
you need to compress the spring with a valve spring compressor tool, and then remove the valve keepers, and retainer.
They are usually referred to as a valve stem. If you remove the cap and place your finger over the hole and feel air, you need a tool to remove the core and replace it. You can get the tool at any auto supply store. If the valve is not leaking from the top the tire must be removed, because one side of the bead must be broken so that the new stem can be pulled through the rim.
with the motorcycle on the ground install tire change tool from tool kit across the tabs on the frame then put motorcycle on center stand. Remove rear fender bolts to raise rear fender, remove axle bolt then remove rear tire.
To remove the spare tire on the 1998 Dodge Ram, you will need a hex tool. Apparently no tools came with the vehicle to do this, so you may end up purchasing this tool. Better yet, take it to a Dodge dealership and they can remove it for you.
Removing a spare tire is easy to do from a Chevy Suburban. The tire is removed with the tool that is located on with your jack.
If you don't have the tool a 13mm socket should work
To change a tire you will need a jack to lift the car, a spare tire, and a tool to remove the bolts of the tire. Use the jack first to lift the car, then remove the tire, replace it with the new one, and tighten the bolts.
valve spring compresser
Several tire dealerships have a tool that will do the job.
you cant