The oil pressure for the DG sets depends with the load.
sump capacity means the oil capacity for the requirements of DG sets. Which is required for controlling, maintanance of DG sets
There are three main parts of dg sets one is avr and anotther one is coolent oil level
sensor is connected on the oil path, which will measure the pressure of oil. it will indicate the pressure as well as alarming and switched off the dg if pressure is low.
If your DG engine oil consuming more means : - You are running DG without loador lower than 30% of the DG Capacity.
Actually safety devices of generator depends on the type of prime mover used in generator. The main safety devices in a DG Set is to control the over speed, to limit the fuel supply in case of emergency. It is regulated by the governor of the DG Sets. In external safety, over voltage & over current tripping relay i.e. associated with DG Sets control panel.
250 running hours
In residential areaWhat are the existing rules on disposal of exhaust from high capacity DG sets say of the order of 625 KVA, four DGsets running simulta, weously.
Low oil pressure or failed oil pressure switch.Low oil pressure or failed oil pressure switch.
Low oil pressure or a defective oil pressure sending unit.Low oil pressure or a defective oil pressure sending unit.
The oil light is comign on to tell you the oil pressure is low. It is not a gauge to tell you oil is low. Your oil pump may be going out and when it loses pressure it sets the light off. Or you could have engine wear to the place that the oil pressure is running low enough to set the warning light off. You may have a bad oil pressure sending unit as well setting off the light so I woul dcheck the oil sending unit first, maybe hook a gauge to it and see what for oil pressure you have and try to determine why your light is coming on.
1- low lube oil safety 2-water safety 3-temprechar safety any athar safety
Low oil, low oil pressure, failed oil pressure sensor.Low oil, low oil pressure, failed oil pressure sensor.