0
For an electrical output of say 1000 MWe, the reactor output will be about 3000 MW thermal.
Wiki User
β 14y ago
Add your answer:
Earn +20 pts
What are some nonexamples fo nuclear fission?
Pressurised Water Reactor (PWR), Boiling Water Reactor (BWR)
What is a Nuclear reactor moisture separator?
This is used in the nuclear reactor that is known as Boiling Water Reactor (BWR) in which heat produced by the nuclear fission in the nuclear fuel allows the light water reactor coolant to boil. Then, the nuclear reactor moisture separator is used to increase the dryness of the produced steam before it goes to the reactor steam turbines.
What is nuclear energy examples?
Mainly:Nuclear power plantsAtomic bombsradioisotopes and radiotracers used in medicine, industry, and agriculturenuclear submarinesnuclear research reactorsnuclear fusion research
What type of reactor does vc summer power plant have?
VC Summer Nuclear Power Station uses a Westinghouse "light water" reactor. "Light water" means that the nuclear reaction is moderated by regular H2O (as opposed to "heavy water" which uses a heavier Hydrogen isotope called "deuterium").
What is the difference between nuclear power plant and nuclear reactor?
It's really just a matter of degree, all reactors produce some power. Those used in a power plant will produce perhaps 3000 to 5000 Megawatts thermal. Low power reactors producing a few kilowatts are used for experiments, teaching in universities, and for producing radioisotopes by irradiating samples, but reactors in this sort of power level would not be harnessed to produce electricity, the heat produced if large enough would be removed and rejected to the atmosphere or to a water cooling circuit. This makes them simple to operate and to start and stop as required.
How big is the reactor vessel in a boiling water reactor?
A reactor vessel in a boiling water reactor is approximately 300 tons.
Are there more are there one type of nuclear reactor?
the boiling water reactor, pressurized water reactor, and the LMFB reactor
What is PWR or BWR?
PWR = pressurised water reactor. BWR = boiling water reactor
State different names of thermal power plant?
Different types of nuclear plants: Pressurised Water Reactor (PWR); Boiling Water Reactor (BWR); Heavy Water Moderated Reactor (CANDU); Advanced Gascooled Reactor (AGR); Fast Breeder Reactor (FBR); Pebble Bed Gascooled Reactor; Water Cooled Graphite Reactor (RBMK). There are other ideas that only exist on paper.
What are some nonexamples fo nuclear fission?
Pressurised Water Reactor (PWR), Boiling Water Reactor (BWR)
Boiling water reactor nuclear power plant?
Basically, nuclear power plants use the heat from a nuclear fission reaction to boil water The steaming water then turns a turbine that generates electricity.
How much energy is lost during nuclear power producttion?
The efficiency of a PWR or BWR reactor power plant is about 33 percent, so this means that about 67 percent of the reactor's thermal output is rejected to the cooling water
A boiling water nuclear reactor delivers what to the turbine blades?
Steam
How is a Pressurized Water Reactor different from a Boiling Water Reactor?
In a PWR the pressure in the reactor primary circuit is kept high enough to prevent boiling, and heat is transferred to a secondary circuit at a lower pressure where steam is produced for the turbine. In a BWR a proportion of the water passing into the reactor is allowed to boil off feeding directly to the turbine. Otherwise, the reactor core itself is very similar.
What are two types of reactors used in the US?
There are amny different types of reactors but the most commonly used ones are: PWR-Pressurized Water Reactor, this works by pressurizing the reactor allowing the water to boil at a much higher temperature allowing efficentcy to be higher. BWR-Boiling Water Reactor,this is the most basic type of reactor this reactor just boils water that turns turbines and produces electricity, however water levels and temperature have to be constantly monitored, otherwise a reactor could slip into a dangerous state. AGR-Advanced Gas Reactor, this reactor instead of being cooled by water it is instead cooled by pressurized carbon dioxide. FBR-Fast Breeder Reactor, this reactor instead of limiting fast neutrons to occur it allows fast neutrons in the reactor and in the act of doing it produces nuclear fuel that can be used to fuel the reactor.
Why it necessary to enclose the nuclear reactor at low pressure?
There is some sort of confusion here. There are two types of water moderated/cooled reactors: boiling water and pressurized water.The boiling water reactor is at normal atmospheric pressure and the water in the reactor boils, producing steam directly.The pressurized water reactor is at elevated pressure to prevent the water from boiling. A heat exchanger/steam generator is used to produce steam indirectly.Other types of reactor (e.g. liquid metal, gas cooled, organic, aqueous homogeneous) also do not operate at pressures below atmospheric.
Why is it necessary to enclose the nuclear reactor at low pressure?
There is some sort of confusion here. There are two types of water moderated/cooled reactors: boiling water and pressurized water.The boiling water reactor is at normal atmospheric pressure and the water in the reactor boils, producing steam directly.The pressurized water reactor is at elevated pressure to prevent the water from boiling. A heat exchanger/steam generator is used to produce steam indirectly.Other types of reactor (e.g. liquid metal, gas cooled, organic, aqueous homogeneous) also do not operate at pressures below atmospheric.
