0
This could very. For example the one on my plain jane computer is rated at 400watts, where as the one in my gaming rig is rated at 1200watts. If its a computer you built, then checking the site of the manufacture of the PSU or Power supply would tell you. If its a computer that you purchased at a store or online, check out the manufacutures website. Both would give you an idea of how big the PSU is in your computer
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is power supply at room temperature called?
peak rating
What is the peak load of a power supply?
A: A power supply when designed it will have some nominal criteria and also some maximum output power available which reflect to the peak load that it can stand without burning up
What is the peak inverse voltage rating of diode in bridge rectifier?
2x the peak supply voltage!
How do you calculate load factor when plant machinery is connected with two supply source ie one is from govt. electricity board supply and another is from diesel generator set supply?
LOAD FACTOR = AVERAGE LOAD ÷ PEAK LOAD AVERAGE LOAD = KW-HRS (ENERGY) ÷ NO. OF OPERATING HOURS IF THE LOCAL PUBLIC ELECTRIC COMPANY CANNOT SUPPLY A CERTAIN PLANT DURING PEAK HOURS -- THE SOLUTION IS TO USE A SECONDARY PRIME POWER FROM THE ENDUSER TO MEET DEMAND LOAD. IF THE ARRANGEMENT IS 12 HRS. FOR NORMAL POWER AND 12 HRS. FOR GENSET -- THE LOAD FACTOR IS THE SAME IF THE AVERAGE LOAD IS CLEARLY DEFINED.
A generating station is to supply six regions of load whose peak loads are 15000kw ,8000kw?
To determine how much power is needed to fulfill each region's requirement, we first need to know the total peak load of all six regions combined. Total peak load = 15000 kW + 8000 kW + (four more regions' peak loads) Assuming the peak loads of the other four regions are x1, x2, x3, and x4, we can write: Total peak load = 15000 + 8000 + x1 + x2 + x3 + x4 We do not have information about the other four regions, so let's assume they each have a peak load of 10,000 kW: Total peak load = 15000 + 8000 + 10000 + 10000 + 10000 + 10000 = 58000 kW Therefore, the generating station needs to be able to supply a peak power of 58,000 kW to meet the combined peak load of all six regions. To determine how much power is needed to fulfill each region's requirement, we need to divide the total peak load by the number of regions: Power needed per region = Total peak load / Number of regions = 58000 kW / 6 = 9666.67 kW Therefore, each region needs a peak power of approximately 9666.67 kW to fulfill its requirement.
What is the conversion for rms power to peak to peak power?
RMS power is Peak-To-Peak power divided by the square root of 2.This definition, however, only holds true for a non-reactive, or resistive, load, with a power source that is truly sinusoidal.
What does peak power and continuous nominal power handling in car speakers?
Peak power is the highest rated output of the speaker when loud (or peak) parts hit. Continuous/nominal power is the average output at normal and continuous listening levels. If you have the Peak Power rating, you can figure out the nominal level by multiplying the peak power by the square root of two (0.707). Peak Power * 0.707 = Nominal Power.
How do you calculate Peak load on the power supply given different appliances and their ratings?
The minimum and the maximum input DC power the powersupply can have. For exemple: Imput 100 - 125 V 6 A and 200 - 240 V 3A.
What has the author Michael K Berkowitz written?
Michael K. Berkowitz has written: 'A note on production inefficiency in the peak-load pricing model' -- subject(s): Economic aspects, Economic aspects of Peak load, Electric utilities, Labor productivity, Mathematical models, Mathemicatical models, Peak load, Rates 'Production inefficiency in the peak-load pricing model' -- subject(s): Economic aspects, Economic aspects of Peak load, Electric utilities, Mathematical models, Peak load, Rates 'Power grid economics in a peak load pricing framework' -- subject(s): Economic aspects, Economic aspects of Peak load, Electric utilities, Mathematical models, Peak load, Rates
What is the difference between Base loads and peak loads in power system?
What is the difference between base and peak load?Load is the amount of power in the electrical grid. Base load is the level that it typically does not go below, that is, the basic amount of electricity that is always required.Peak load is the daily fluctuation of electricity use. It is usually lowest in the wee hours of the morning and highest in the early evening. It also varies seasonally.Are base and peak loads provided differently?Base load is typically provided by large coal-fired and nuclear power stations. They may take days to fire up, and their output does not vary. Peak load, the variable part of the electrical supply and demand, is provided by more responsive and smaller plants whose output can be quickly ramped up and down or that can even be quickly turned on and off.
What determines leading or lagging power factor?
underdampedAnswerA lagging power factor describes a situation in which the load current is lagging the supply voltage. This describes an inductive load, such as a motor, etc.
What is the relationship betweenth the power factor and the load?
No Load factor is average power consumption rate divided by peak power consumption rate over a period of time. Power companies like customers who have very steady consumption rates ......Load factors approaching 1 Power factor is true power / apparent power (kW/kV.A) and is a measure of how efficiently a customer's load consumes power. Certain types of electrical loads consume power more efficiently ( resistive element heating ) and they have a Power factor approaching 1. Other types of load such as old inductions motor are quite wasteful consumers of power and the utility has to provide more current ( amperage ) for the load to convert to real power
