0
Dealer cost is about $1100 so I imagine msrp is somewhere around $2200
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
When was Mattracks Inc. created?
Mattracks Inc. was created in 1995.
What is a Bestop PowerBoard used for?
The Bestop PowerBoard is a movable running board that can be extended out from the side of a truck. It is motorized so it can be retracted into the underside of the vehicle to reduce wind drag.
Will all appliances plugged into a non surge protected powerboard be surge protected if the powerboard is plugged into a surge protected powerboard or PowerPoint?
Starting at the surge protection device every thing down stream from it will be protected. Any thing up stream from the surge protection device will not be protected.
How much does a mattracks power board cost?
$2500
Do you need a powerboard to type in action replay codes on your GameCube?
mabye
What is the top speed a Toyota Land Cruiser with mattracks fitted?
45 mpg on pavement, any speed on dirt
How do mattracks mount to the wheel?
Mattracks, like all track systems for four-wheeled vehicles, mount in place of the conventional wheel. It's as simple as raising the vehicle off its wheels, removing the wheels and bolting the tracks on to the same studs that hold normal wheel to the vehicles' axles. In more detail, note that each track has its own frame and that frame is secured to the frame of the vehicle so that the whole track remains on the ground and doesn't start spinning around the axle. For the front, steering wheels, there's an arm from the frame of each front wheel mounted track, to the steering assembly so the track can steer normally. Mattracks and Camoplast are the main suppliers of vehicle tracks. Mattracks is more oriented to whole track assemblies, Camoplast is a major manufacturer for tracks including vehicles such as snowmobiles. Both work well and have their advocates. No one product has a compelling advantage over the others.
How much do mattracks cost?
You can buy extremely cheap ones from China on www alibaba dot com (is where are all made anyway!)how much do mattracks cost for a four wheeler? any size.You probably won't enjoy this answer but truth be known... As a very non-scientific rule of thumb, you can pretty much count on a set of these to cost roughly about as much as the vehicle you intend to put them on. I recently saw a USED set of 200 series mattracks with an asking price of $50,000. I also saw a set of USED 175 series mattracks on e-bay with an asking price of $30,000. I've seen used ones on eBay for smaller vehicles with asking prices anywhere from $8000 to $20000+ and for ATV's for a couple thousand + or so. Okay, like me, hearing this probably just gave you a sinking feeling. Here's the deal...though Mattracks are not the only track conversions out there, they are the BEST BY FAR. Their closest competition (American Track Truck) is less expensive (if you call wish to call a price tag of thousands of dollars "less") but they currently don't make any for full size vehicles and they most definitely aren't in the same class as the products mattracks puts out...you get what you pay for. Mattracks are intended for those who are seeking a more economical and more flexible option to buying a purpose-built and very expensive dedicated tracked vehicle. They are pretty much limited to those with a bonified need and the budget that goes along with that need. For the ATV's and small vehicles you "might" find them within the average person's budgetary reach. Larger vehicles get...um...pricey.Okay, so let's answer your question directly: Prices For A New Set Of Mattracks (November 2009) which I obtained from a Mattracks Dealer (There is some variability within the different models in each class though nothing too big relatively speaking, so these prices should be pretty representative of all the models within a particular series):200-M1-A1 $70000 (68000 + $2000 for Steering Assist unit). The 200 series is designed for loaded medium duty trucks such as an F-450 or F-550175-M1-A1 $40000 The 175 series is for the light end of medium duty or heavy end of light duty trucks. Think F-350 or F-450, perhaps even an F-250 if your planning on really loading it down.150-M1-A2-SA $36500 Think the medium end of light duty trucks, such as an F-250 or an F-350 (or even the heavy end of the 1/2 ton market if you're planning on loading the truck down).105-M1-A1 $26500 Think F-150, Expedition, Explorer, even down to the truly light end such as a Jeep.88 Series (sorry didn't manage to get an actual price...my fault) but they are pretty much designed for the really light end such as jeeps or some of the light/small 4WD SUV's. I was told they really aren't that much less expensive than the 105 series.LiteFoot XT $5100 These are for ATV's. It was strongly suggested that you get an ATV with some sort of power assisted steering.The Least Expensive Mattrack (barring the Trail-R-Mates for non-driven trailers, and no, I didn't check on the prices of the Track-Tor-Mates) is the LiteFoot XL which has NO internal suspension (think truly rough ride) which lists at $3400 new.Yeah, I would LOVE to have a set of 150 or 175 series Mattracks for my truck, but until I win the lottery like you I will continue to wish... Perhaps someday...Actually, American Track Truck produces the Dominator series tracks which sell for less than 1/3 the cost of Mattracks 105-M1-A1--making them a much more affordable alternative. They are intended for mid-size passenger vehicles such as Chevy Blazers, Jeep Cherokees, Ford Explorers, and some half ton trucks. The Dominator tracks are less than ½ the weight of the Mattracks, so they allow better floatation and require less power. They are more appropriate for the average person who wants to take their vehicle places where tires won't go-deep snow, ice, swamps, wetlands, mud, etc. They are not intended to be used on real heavy vehicles, or for purposes like rock crawling or desert warfare. If you have these kind of needs, save up and buy the Mattracks.
How do you connect a Wii powerboard to your Wii?
turn the wii on then turn the board on then press both sinq buttens. Just like a wiimotefind the sinq button on the front of the wii and in the place where you put the batteries on the board.
Are rubber tracks for hevy duty trucks interchangable?
Yes, rubber tracks are interchangeable on "heavy duty" trucks. One common seller of these replacement rubber tracks is Mattracks. This company can easily replace rubber tracks for a fee.
Who does Jacob nason like?
Kenny price Kenny price Kenny price Kenny price Kenny price Kenny price Kenny price Kenny price Kenny price
What is Ex-stock price?
Ex-stock price is that price which is immediately deliverable at that price and not price qouted is for stock price of item.
