i would check that the brake light switch is not sticking in the on position,and that there is enuff clearance to allow it to shut off when brake not applied
What fuse is for the 2005 Ford mustang Rear Brake lights?
what number fuse for the break lights
Usually, the panel has fuses that are individually marked. This helps mechanics or automotive electricians know what each fuse is used for. On a 2005 Ford Econoline, the fuse for brake lights is fuse number 34.
its gotta be a ford a problem with the center brake light circuit causes the lights to go out i believe it is a diode
I am not sure on a ford but i had about the same problem on a GM car i had and it was the turn signal switch i replaced it and all the brake lights worked fine you might try that
A Ford Tempo will have no brake lights if the bulb has blown or the wires have come loose. Alternatively, the brake sensor in the dash can fail and stop sending power to the lights.
THAT IS USUALLY AN INDICATION OF A BURNED BRAKE LIGHT SWITCH. SWITCH IS USUALLY LOCATED ON THE BRAKE PEDAL ITSELF. DISCONECTED AND IF THE LIGHTS GO OUT YOU HAVE FOUND YOUR PROBLEM , SIMPLY REPLACE IT.
Sounds like it could be a problem with your brake light switch mounted on the arm of your brake pedal under the dash.
yes my brake lights dont work First check the fuses, then check the bulbs then check the brake light switch
I imagine that more than likely the problem is going to be easy to fix by replacing the fuse.
It is important to know what the warning lights mean on a dashboard. The ABS lights flash on any vehicle when there is an issue with the brake system.
Most likely no brake lights would be due to a faulty switch on the brake pedal or a bad fuse.