answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What is the procedure for installing a water column on high pressure steam boiler?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Chemical Engineering

How does operating pressure affect distillation?

Pressure is an important part in distillation because boiling points of different components to be separated depends on pressure, for normal distillation pressure is kept as 1 atmosphere but for components with high boiling points instead of rasing the temperature pressure is lowered till the vapor pressure of the components to be separated, hence the temperature to be raised becomes less, for example in vaccum distillation.


How flooding in distillation column control?

flooding in disillation column is control: 1) to reduce total crude charge, 2)to decrease the transfer temperture, 3) increase the tower reflux, 4) increase the tower pressure.


How weeping avoid in distillation column?

Limiting the hole area to 13-14% prevents weeping in distillation columns. This may be limited by the allowable pressure drop specified for the column (too little leads vendors to specify a higher % hole area, thus causing weeping).


What is a batch distilation column?

This is a distillation column that doesn't have a continuous feed. The material that is to be distilled will typically be in a round bottom still at the end of the column.


What is the purpose of Reflux in an oil refinery?

The reflux is the return of top product condensate from a distillation column back to the top of the column where it is able to flow down the column aiding with cooling and thus condensation in the column. It increases efficiency and enables a lower amount of theoretical plates to be used in the column.

Related questions

One column of water has twice the diameter as another column of water. If the pressure is the same at the bottom of each column. How do the heights of the two columns compare?

The column with the smallest diameter has greater pressure and the column with a larger diameter has less pressure.


What is water column pressure?

it is where pressure increases and gets harder to travel through


What is the pressure of 10 inches of water column?

10 inches of water column equals to how much gas pressure?


What is an air column?

the weight of a column of air above you that puts pressure on you


Are there any risks associated with installing a vinyl proch column?

There are many risks associated with installing a vinyl porch column. Their can be damage or break apart easily. If the proper installation steps and precautions are taken a lot of risks can be avoided.


How much does pressure does a one half inch diameter column of water exert at its base?

The diameter of the water column does not affect the pressure.It is the height of the column that determines the pressure at the base.(and also the barometric pressure and temperature).


What is measured using a water column manometer?

A water column manometer measures pressure, such as the pressure output from a cpap unit used for sleep apnea.


What is the height of water column produces the same pressure as a 760mm high column of Mercury?

Atm


What are the directions for installing a new steering column in a Ford F250?

Remove old column put new column install new column in reverse order, you have 4 mounting bolts, shift linkage some wirings plugs and your dash indicator assy.


Why is the value of atmospheric pressure compared to mercury?

Atmospheric pressure will support a column of mercury to about 760 mm. Mercurial air pressure is described as '760 mmHg'. As air pressure changes , the height of this column will also change. If you did it with water, the column would have to be about 34 feet (10.2 metres) in height.


What kind of pressure does a column of air exert on the air or surface below it?

air pressure


What does mlc stand for pressure?

MLC stands for Mean Laplace Compliance, which is a metric used to evaluate pressure sensitivity in sensors. It measures how a sensor's output changes in response to pressure.