1. Turn the power switch IG-ON (foot off brake, push power twice) and make sure that the ODO/TRIP meter is displaying the odometer. 2. Turn the power switch OFF. 3. While pushing (and holding) the ODO button, turn the power switch IG-ON. 4. The reminder light will flash until the reset is completed. 5. The reset is complete when the reminder light turns OFF. Release the ODO button. 6. After the reset, the ODO/TRIP meter displays as a set of zeros for 1 second, then displays your normal odometer mileage.
The indicator is there to remind the driver when a certain number of miles has been reached, 7,500 in most cases. When no maintenance is required, the indicator will be green. If maintenance is needed, the indicator will turn red.
Check engine light or required maintenance light. Procedure for resetting required maintenance light just answered. Check engine light requires an OBD II to determine problem and turn the light off.
maintenance required
PLIZ HELP How can i reset the injector maintenance required in lexus gs350 2012
I changed the battery and voila' - no more light.
Use your key and insert it into the slot next to the maintenance indicator, which I suppose is red if you're asking this question. It should be the only slot on your instrument panel. This will reset your indicator to green.
this work on the 2004 rx330 Make sure only the odometer display is on - ie. it is not in trip a or b mode. Once done, press and hold the reset button next on the left next to the steering wheel, then cycle the key to accessories on. The dashes will disappear one by one on the odometer display until gone. Once gone the resetting procedure is complete.
It just needs an oil change. If you take it to a Honda dealership to get it fixed, they will normally reset it for you. On the 1995 Honda Accord station wagon, the 'maintenance required' indicator is easily reset by using a key to push in the little flat 'button' located near the indicator.
there's a test fixture you can either buy from the dealer, ugh, but if not you still have to go to the dealer and let them reset it. You might check with local repair shops that could do the resetting also. If it's the first time it has come on then you may need to have some routine maintenance done on it, in which case if you go to the dealer and have the maint. they will automatically reset it for you at not charge, otherwise they will charge you.
push key into the slot to reset.turns red every 6000 miles.
Resetting the maintenance light on a 1998 Odyssey is very easy to do. All you need to do is hold the reset button down and then turn the ignition on at the same time. The button will need to be held for 10 seconds.
Resetting the Maintenance Information DisplayNOTE:The vehicle must be stopped to reset the display.If a required service is done and the display is not reset, or if the maintenance display is reset without doing the service, the system will not show the proper maintenance timing. This can lead to serious mechanical problems because there will be no accurate record of when the required maintenance is needed.The engine oil life and maintenance item(s) can be reset independently only with the HDS.1. Turn the ignition switch to ON (II).2. If system message(s) are displayed, press the INFO switch to cancel the display.3. Push and release the Select/Reset switch repeatedly until the engine oil life indicator is displayed.4. Press and hold the Select/Reset switch for about 10 seconds, the ''MAINTENANCE RESET'' mode display appears.NOTE:If you are resetting the display when the engine oil life is more than 15 %, make sure any maintenance item(s) requiring service are done before resetting the display.To cancel the ''MAINTENANCE RESET'' mode, press the INFO switch repeatedly until the ''CANCEL'' indicater is displayed, then press the Select/Reset switch.Press the INFO switch to select ''RESET'', then press the Select/Reset switch. The maintenance item code(s) will disappear, and the engine oil life will reset to ''100.''