This information is listed in your owner's manual and under the hood on a placard. Also when you purchase the new plugs that are pre-gapped at the factory and should be correct. However I recommend you check the gap to make sure. The parts store can provide the proper gap.
The 3.0 liter " Vulcan " V6 engine and the 3.0 liter " Duratec " V6 engine each have ( 6 spark plugs )
the gap is .60 on plugs gap is .060 on plugs.
Gap the plugs .038" to .043" and torque the plugs to 22 ft/lbs.
Gap on plugs should be .044" =========================================================== If you have the 3.0 liter " Vulcan " V6 engine( or its flex fuel version ) The 3.0 liter " Duratec " Dual Over Head Cam engine is ( .054 inch ) * confirm with the Vehicle Emission Control Information ( VECI ) decal located in the front of your engine compartment
The proper gap specification for the spark plugs are ( .039 - .043)
Depending on what plug you are running, .40 to .44
I believe .41 Do not quote me on that. Maybe .44
If it's points or a Dyna S ignition you set the plugs at 28, other wise you set the plugs between 38 - 40
With a socket set :)
The 2.3 liter 4 cylinder engine has ( 8 spark plugs ) , twin plug ignition system The 2.9 liter and 4.0 liter V6 engines have ( 6 spark plugs )
The 3.0 liter and 4.0 liter V6 engines have ( 6 ) spark plugs The 2.5 liter 4 cylinder engine has ( 8 ) spark plugs with Fords twin plug ignition system
Depends on your engine: 1.0 liter 3-cylinder = 3 spark plugs, 1.3 liter 4-cylinder = 4 spark plugs