0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Which side of a boat do you cast the anchor?
The side where the anchor line will give you the least problems.
What side of the boat do you anchor?
from the bow
What side of the boat do you drop anchor?
from the bow
What is a good anchor for recreational boat?
A Danforth style (one manufacture is Fortress) or a simple mushroom anchor. The bottom terrain is also an important factor in determining the proper anchor.
What part of the boat do you anchor from?
Sailing yachts have the anchor at the bow of the boat.
What is proper technique for anchoring a boat?
Type your answer here... Lower your anchor, put the boat in reverse and backup until the flukes dig in, tie it off and your done.Didn't work? That's probably because:1. Proper sized anchor for the boat.2. 5 feet of chain attached between the anchor and the rode (rope)3. 5 - 10 times the depth is the amount of rode must be played outThe chain and length of the rode are all about creating the proper angle of the rode in relation to the anchor and boat. If the anchor rode angle is too steep, it will pull the flukes out of the bottom, resulting in boat drifting.Approach the anchor position, head to wind or current.The vessel should be moving slowly astern before letting go.Lay the cable on the bottom, usually three times the depth, or more in rough weather.Pick a reference point on shore to gauge if you are dragging
What is the proper technique for anchoring a boat?
Type your answer here... Lower your anchor, put the boat in reverse and backup until the flukes dig in, tie it off and your done.Didn't work? That's probably because:1. Proper sized anchor for the boat.2. 5 feet of chain attached between the anchor and the rode (rope)3. 5 - 10 times the depth is the amount of rode must be played outThe chain and length of the rode are all about creating the proper angle of the rode in relation to the anchor and boat. If the anchor rode angle is too steep, it will pull the flukes out of the bottom, resulting in boat drifting.Approach the anchor position, head to wind or current.The vessel should be moving slowly astern before letting go.Lay the cable on the bottom, usually three times the depth, or more in rough weather.Pick a reference point on shore to gauge if you are dragging
Where should you position your boat to retrieve your anchor?
Move the boat directly over the anchor
L you're operating a boat at night you see green and white lights on another boat what do they like to tell you?
You're on that boat's right ("starboard") side, and the other boat is not lying at anchor.
According to the Navigation Rules a rapidly ringing bell every minute signals what?
According to the Navigation Rules, a rapidly ringing bell every minute signals a boat at anchor in the fog.
What is the proper technique for anchoring boats?
Type your answer here... Lower your anchor, put the boat in reverse and backup until the flukes dig in, tie it off and your done.Didn't work? That's probably because:1. Proper sized anchor for the boat.2. 5 feet of chain attached between the anchor and the rode (rope)3. 5 - 10 times the depth is the amount of rode must be played outThe chain and length of the rode are all about creating the proper angle of the rode in relation to the anchor and boat. If the anchor rode angle is too steep, it will pull the flukes out of the bottom, resulting in boat drifting.Approach the anchor position, head to wind or current.The vessel should be moving slowly astern before letting go.Lay the cable on the bottom, usually three times the depth, or more in rough weather.Pick a reference point on shore to gauge if you are dragging
What is the effect on the volume of water displaced by the boat if an iron anchor is lowered over the side of the boat?
The volume of the displaced water would be less - as you're reducing the mass of the boat. Another viewpoint: I think there's a bit more to this question, but the basic answer remains the same. I think it's all about "Archimedes' Principle". Let's consider the anchor as still part of the boat. Also let's think about it before it gets partly buried in the ground underwater. Archimedes' Principle tells us: The "upthrust" on the boat before the anchor is lowered is equal to the weight of the whole boat. That equals the weight of water displaced. The anchor itself doesn't float in water. It is denser than water. When the anchor is completely submerged it displaces an amount of water equal to the anchor's volume (not the anchor's weight). When the anchor was on the boat it displaced an amount of water equal to its weight. So, when the anchor is lowered, the boat (including anchor) displaces a slightly smaller volume of water.
