A 1997 Mitsubishi Mirage DE Coupe needs spark plugs that have been set with a gap of .043 inches. This is equal to 1.1 mm.
hi A 1997 Mitsubishi Mirage DE Coupe needs spark plugs that have been set with a gap of .043 inches. This is equal to 1.1 mm.
The proper gap specification for the spark plugs are ( .039 - .043)
The proper spark plug gap for a 1994 Mitsubishi Mirage is .030 thousandths of an inch. The Mirage has a 1.5L engine.
Here is your answer: http://www.autopartswarehouse.com/mmp/mitsubishi~mirage~spark_plug~parts.html
Spark Plug gap .044"
There is not a distributor on a Mitsubishi Mirage. It uses two coils that are located on top of the valve cover. one coil provides spark for two cylinders.
I have a 97 Mirage LS Coupe and the spark pluge are located under the coil wires. If you are looking at your motor from the front of the car you can get to the 4 plugs on the top of the motor. You will need a 10mm socket to remove the coil wires. There are 2 of them. There are near the oil cap. I hope that helps.
should be 1.016 mm or .044 inches
Have you checked the spark plug wire for that cylinder,??????????
buddy: this kind of cars/engine use a cam shaft sensor and crank shaft sensor that mean the computer send the signal for the spark. and don't use an rotor/ cap, coil and you can not fix the timing. i hope this help.
The spark plug gap on a 1998 Mitsubishi Lancer Coupe Gil should be set between .039 and .043 inches. This gap specification was set by the manufacturer.
18436572