Want this question answered?
no,this valve intergrates with the sensors in the brake system. replace the HSP valve
I Need Help With My 1992 Toyota Privia Please Answer My Question.
faster release of service brake
Lspv-load sensing proportioning valve is the part of break assembly .it senses the load of vehicle and aply an effective pressure with respective to the vehicle loaded or unloaded & break the vehicle.also avoid skiding of vehicle.
Not knowing what kind of vehicle you have, all I can do is guess that it is a load/height sensing proportioning valve.
It a gas valve
The proportioning valve is used to determine the amount of brake power to be distributed to the rear wheels by sensing the height of the bed (differences in rear weight) if replacing valve you should properly bleed air out of system. The valve is there for a reason it should not be bypassed.
It is a height sensing proportioning valve. It controls rear brake pressure depending on load.
The brake valve is located next to the master brake cylinder. The valve can be found just below the master brake cylinder.
A valve in the brake system which houses portioning valve metering and pressure differentional valve
If you have ABS there are no valves, If no ABS they are under the rear of the car attached to the rear suspension with a spring. From the Haynes Manual
It's a height sensing valve. If the vehicle is heavily loaded the rear end sits lower and the valve allows more fluid to get to the rear brakes. When lightly loaded the vehicle sits higher and the opposite happens.