to heat the iron so that it separates from other elements in the ore
Due to the high carbon.
hematite with 66% iron in it. In olden days haematite is directly fed into the blast furnace
You don't. Carbon burns! The fuel is carbon (as coke). The refractory lining (fire-bricks) is made from minerals with very high melting-points.
smelting is used for sulfide ores. Iron ores require a blast furnace. aluminum ores require high temperature electrolysis. etc. it varies by type of ore and metal.
They are materials , usually bricks, made with silicon oxides, that will withstand extremely high heat, without decomposition or chemical reaction. e.g. Blast Furnaces are internally lined with refactory bricks to with stand tha 1100 oC temperature of the furnace. The metal shell/chassis of the furnace would melt. Outside these refractory bricks is a water jacket to prevent heat escaping, into the outside environment.
the height of blast furnace is kept high to ensure the completion of reaction.
1650 Celsius
Due to the high carbon.
yes heating furnace use coal and wood to heat and work.Because you cannot get such high temperature without that .
a high efficiency furnace is a furnace that uses less electicity and saves on heating expences. they are very useful in the winter and great to lower your central heating bills.
According to steel.nic.in; Coke Rate is measured in Kgs of BF Coke consumed per tonne of Hot Metal produced in the Blast Furnace(Kg/THM). By convention, this excludes coke (nut/pearl coke) mixed with sinter etc. Introduction of high quality coke to a blast furnace will result in lower coke rate, higher productivity and lower hot metal cost. This principal is followed by many private chemical firms like Coke Oven Consultants and so on.
Appliances for heating purpose have high power ratings.
hematite with 66% iron in it. In olden days haematite is directly fed into the blast furnace
Try heating and air conditioning shops or full-service plumbing shops. If you look in the Yellow Pages of your phone book under 'Heating contractors' or 'Heating Equipment', you should see some shops near you listed.
You don't. Carbon burns! The fuel is carbon (as coke). The refractory lining (fire-bricks) is made from minerals with very high melting-points.
It depends on what type of central heating unit that you have. An electric furnace will drive the electrical utility bill very high. If it is a natural gas furnace, not a very high electrical demand just for the blower fan. A heat pump demand is just above a gas furnace but more efficient. Heat pumps usually have electric heating as a back up for the very cold days. Fan heaters are usually rated about 1500 watts and are a little inefficient to heat large rooms. They will probably be on more that they will be off.
smelting is used for sulfide ores. Iron ores require a blast furnace. aluminum ores require high temperature electrolysis. etc. it varies by type of ore and metal.