According to steel.nic.in; Coke Rate is measured in Kgs of BF Coke consumed per tonne of Hot Metal produced in the Blast Furnace(Kg/THM). By convention, this excludes coke (nut/pearl coke) mixed with sinter etc.
Introduction of high quality coke to a blast furnace will result in lower coke rate, higher productivity and lower hot metal cost. This principal is followed by many private chemical firms like Coke Oven Consultants and so on.
Please formulate and articulate a more positive question, all so use spell check.
nut coke is charged in blast furnace with the iron bearing material to form mixed layer and purpose to use is to save bf coke.
A retaining nut could be the packing gland nut on a valve stem or the nut used on a flare or compression fitting
A nut is called screw when its head is tightend in component .but in case, tight of nut is not possible without bolt.since screw is tight without nut bolt it is not possible in case of nut.
What is the history evolution of nut?
yes its the nut of a horse chestnut tree.
The same way you tighten any other nut. Use the appropriate tool to the recommended specifications.
Low ash content coke that is 10-25mm or 12-30mm [industry definitions vary] in size. The majority of blast furnaces nowadays use nut coke of different grain sizes primarily to reduce costs.
Neither. Caffeine is a natural ingredient in the kola nut, an important ingredient in both Coke and Pepsi.
put lime in coke you nut and drink it all up
Because Coca Cola (Coke) and Pepsi Cola, two different companies, use different ingredients to create their soft drinks. Coke and Pepsi are not both coke, but they are both colas because they both include kola nut flavoring in their ingredients. Pepsi tends to taste sweeter that Coke when compared side by side.
If your talking about elder release form then yes. Nut he will not have the sword and supreme Kai outfit
I sincerely hope not. As far as anyone knows, coke is made of corn syrup, artificial colors and flavors and cola nut extract. Different Person: What would make you think that?
acording to my research no. The only ingredients in a normal coke are:-sugar, caramel color, caffeine, phosphoric acid, coca extract, kola nut extract, lime extract, vanilla and glycerin
proton there is no such thing as an electrical charged nut there is such a thing as a charged particle, that is also known as neutron
proton there is no such thing as an electrical charged nut there is such a thing as a charged particle, that is also known as neutron
proton there is no such thing as an electrical charged nut there is such a thing as a charged particle, that is also known as neutron
Soak nut assembly with Coke (yes coca cola) for at least 1/2hr. This will clean most of the dirt and sizes> Have the rest of Coke while waiting. Clean as much as possible. Soak with diesel fuel (kerosene) mixed with motor oil (3:1)for couple of hours or leave soaked overnight. From time to time hammer the nut using brass or aluminum to protect the nut from damage. After this the nut should go. Carefully the nut can be heated with propane torch or paint strip heat gun. Avoid heating over 60 Deg C. Overheating may cause the bearing grease to melt in liquid. 60 Deg C is approx the temperature on which man can not touch for more than a second.
you put the lime in the coke you nut and drink it all up then take the lime out the coconut and eat the cocnut all up!