what is the function of transformer in the half wave rectifier circuit
Helps with the starting of large electric motors.AnswerAn autotransformer is a transformer with a single winding, rather than two separate windings. It can be used as a step-up or as a step-down transformer, provided there is no requirement for electrically-isolating the secondary circuit from the primary circuit.
such a control rectifier that control or rectifier single phase. for that purpose we used SCR that is called single phase controlled rectifier.
Relay are operated by small current /voltage connected to Secondary side of Current Transformer and /or Voltage Transformer. The signal stimulates the magnetic substance nearby with the attracting force. This closes or opens the circuit being used in protection purpose.
potential transformer is to maser and protection purpose the ivt is used for synchronicing purpose
An open-circuit test is done with the transformer running at its rated voltage but with no load. This measures the power lost in the magnetic core. (IR Losses) A short-circuit test is done with the transformer running at its full rated current in all windings but at a low voltage. The secondary is shorted and the primary voltage is adjusted to give the rated current. This measures the power lost in the copper windings. (Copper losses)
Four diode rectifier not require a center tapped transformer.
Helps with the starting of large electric motors.AnswerAn autotransformer is a transformer with a single winding, rather than two separate windings. It can be used as a step-up or as a step-down transformer, provided there is no requirement for electrically-isolating the secondary circuit from the primary circuit.
Its an erection to the extreme purposely used for making love Rate my answer.
Open circuit and short circuit tests are performed to determine transformer characteristics. In the case of a single phase transformer, SC tests would be performed to determine the impedance. The open circuit test will give excitation information (% excitation at specific voltages, often 90%, 100% and 110%, and no load losses).
such a control rectifier that control or rectifier single phase. for that purpose we used SCR that is called single phase controlled rectifier.
A no-load test is done with the normal supply connected in the way the transformer is intended to be used. It is also known as an open-circuit test to distinguish it from a short-circuit test, and its purpose is to measure the power loss in the iron core of the transformer and the no-load current drawn from the supply.
Transformer is a electric device which it can be used for to transfer the ac current one circuit to another i.e. To reduces voltage and without frequency changing. Many types of transformer available in various purpose i.e. Stepup transformer, stepdowntransformer ,autotransformer ,,,,,,,etc answered by arivukkarasu.a
To supply the bell, because the latter has a rated voltage that's lower than the mains.
such a control rectifier that control or rectifier single phase. for that purpose we used SCR that is called single phase controlled rectifier.
Relay are operated by small current /voltage connected to Secondary side of Current Transformer and /or Voltage Transformer. The signal stimulates the magnetic substance nearby with the attracting force. This closes or opens the circuit being used in protection purpose.
Are you referring to the Rectifier in the Alternator? Simply, a rectifier turns the AC voltage produced my the alternator to run the electrical components in your vehicle and turns it into DC voltage to recharge your battery.The purpose of rectifier assembly is to turn the AC voltage. This is in a car.
potential transformer is to maser and protection purpose the ivt is used for synchronicing purpose