0
What else can I help you with?
What is the purpose of auto transformer?
Helps with the starting of large electric motors.AnswerAn autotransformer is a transformer with a single winding, rather than two separate windings. It can be used as a step-up or as a step-down transformer, provided there is no requirement for electrically-isolating the secondary circuit from the primary circuit.
What is single phase Controlled rectifier?
such a control rectifier that control or rectifier single phase. for that purpose we used SCR that is called single phase controlled rectifier.
How relay used for protection purpose?
Relay are operated by small current /voltage connected to Secondary side of Current Transformer and /or Voltage Transformer. The signal stimulates the magnetic substance nearby with the attracting force. This closes or opens the circuit being used in protection purpose.
What is difference between interposing voltage transformer and potential transformer?
potential transformer is to maser and protection purpose the ivt is used for synchronicing purpose
What is the purpose of open circuit test and short circuit test of a transformer?
An open-circuit test is done with the transformer running at its rated voltage but with no load. This measures the power lost in the magnetic core. (IR Losses) A short-circuit test is done with the transformer running at its full rated current in all windings but at a low voltage. The secondary is shorted and the primary voltage is adjusted to give the rated current. This measures the power lost in the copper windings. (Copper losses)
Why to use four diodes when two diodes also can serve the purpose in bridge rectifier?
Four diode rectifier not require a center tapped transformer.
What is the purpose of the common wire transformer in an electrical circuit?
The purpose of the common wire transformer in an electrical circuit is to step up or step down the voltage to the desired level for proper functioning of the circuit components.
What is the purpose of conducting sc and oc test of single phase transformer?
The purpose of conducting sc (short circuit) and oc (open circuit) tests on a single-phase transformer is to determine its equivalent circuit parameters, such as the winding resistance, leakage reactance, and magnetizing reactance. These tests help to evaluate the transformer's performance and efficiency under various operating conditions.
What is the purpose of auto transformer?
Helps with the starting of large electric motors.AnswerAn autotransformer is a transformer with a single winding, rather than two separate windings. It can be used as a step-up or as a step-down transformer, provided there is no requirement for electrically-isolating the secondary circuit from the primary circuit.
What is the purpose of bridge rectifier in the circuit?
Its an erection to the extreme purposely used for making love Rate my answer.
What is single phase Controlled rectifier?
such a control rectifier that control or rectifier single phase. for that purpose we used SCR that is called single phase controlled rectifier.
What is transformer w?
Transformer is a electric device which it can be used for to transfer the ac current one circuit to another i.e. To reduces voltage and without frequency changing. Many types of transformer available in various purpose i.e. Stepup transformer, stepdowntransformer ,autotransformer ,,,,,,,etc answered by arivukkarasu.a
Why in no load test transformer is connected on low voltage side?
A no-load test is done with the normal supply connected in the way the transformer is intended to be used. It is also known as an open-circuit test to distinguish it from a short-circuit test, and its purpose is to measure the power loss in the iron core of the transformer and the no-load current drawn from the supply.
What is the purpose of OC and SC tests on single phase transformer?
Open circuit and short circuit tests are performed to determine transformer characteristics. In the case of a single phase transformer, SC tests would be performed to determine the impedance. The open circuit test will give excitation information (% excitation at specific voltages, often 90%, 100% and 110%, and no load losses).
What is phase control?
such a control rectifier that control or rectifier single phase. for that purpose we used SCR that is called single phase controlled rectifier.
What is the purpose of using transformer in electric bell circuit?
To supply the bell, because the latter has a rated voltage that's lower than the mains.
How relay used for protection purpose?
Relay are operated by small current /voltage connected to Secondary side of Current Transformer and /or Voltage Transformer. The signal stimulates the magnetic substance nearby with the attracting force. This closes or opens the circuit being used in protection purpose.
