What is the ratio of cement and sand and crused stone in mix concrete of M-10 value?

The ratio of cement, sand and crushed stone in M 25 grade concrete is 1:1:2. In this grade of concrete a compressive strength not less than 25 N/mm2 is achieved in 28 days.

The ratio of cement, sand and crushed stone in M 15 grade concrete is 1:2:4. In this grade of concrete a compressive strength not less than 15 N/mm2 is achieved in 28 days.

162. Comparison Of Quantities Of Materials - The mixture of concrete used for this class of work is often 1 part Portland cement, 3 parts sand, and 6 parts stone. The quantities of materials required for one yard of concrete (www. books.google.com) ("Cement and Concrete") 495. The concrete was one part Portland Cement; three parts sand; three parts gravel and three parts broken stone. (www.books.google.com) ("Cement and Concrete")

Cement, sand and stone is what concrete is made of. Cement is the binding agent.

Cement water =concrete. Clay limestone= cement shells stone =limestone plankton+stone =shells

mortar are mixing by sand & cement and concrete is mixing by cement, sand & stone

•An example of this is concrete. The stone is the particulate and the cement acts as the matrix. The stone mixes with the cement and forms a composite.

Cement is hydrated limestone. Concrete is cement, stone and sand. Sometimes fiberglass fibers are added to increase strength.

Mortar has sand in it. Concrete has cement, sand and stone.

How much cement sand and stone do you need for 1 cubic meter of concre

The sand and stone adds a binding quality to the cement making the concrete or plaster stronger than pure cement.

The cement density is used in the calculation of the total aggregate content and of the concrete density.Normal concrete has a density around 2400 kg/cubic meter or 4048 lb/cubic yard. There are many different kinds of concrete, many of which are much lighter. Cement is the liquid (or paste like) form, and tends to be much heavier than when it has cured into concrete. "Cement" is not concrete, but can be used to make concrete…

Normal concrete has a density around 2400 kg/cubic meter or 4048 lb/cubic yard. There are many different kinds of concrete, many of which are much lighter. Cement is the liquid (or paste like) form, and tends to be much heavier than when it has cured into concrete. "Cement" is not concrete, but can be used to make concrete by mixing with sand, stone and water. The density of cement is about 3120kg/m3.

Clay w/fire is brick - - - Concrete + Brick = Brick House Water + Cement = Concrete Clay + Limestone = Cement Stone + Cockleshell = Limestone

If you mix cement ,sand and water you get mortar If you mix cement and stone pebbles or chips you get concrete Concrete.Sometimes gravel is mixed with it, too.

1:1.5:3 (cement,stone,sand)

Look up concrete in Wikipedia for detailed information. Concrete for a foundation or floor is generally mixed in the proportion 1 part cement, 2 parts sand, and 4 parts gravel (or crushed stone). Crushed stone is better than water worn stone as its irregular shape makes for stronger concrete. If a bag of cement is approximately 1 cu. ft., a 1:2:4 mixture calls requires 1 bag cement, 2 cu. ft. sand and 4 cu. ft…

Concrete is a well proportioned mixture of cement and other cementitious materials such as fly ash and slag cement, coarse aggregate made of crushed stone, fine aggregate such as sand, water, and chemical admixtures. The more inclusive answer is that concrete is a matrix of stone/sand aggregate adhered into a mass with a binding agent like Portland Cement or hot asphalt oil. This can refer to a person: He was as solid as concrete and…

Gypsum slows down the setting of cement. Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is basically a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement. Concrete gets stronger as it gets older. Portland cement is not a brand name, but the generic term for the type of cement used in virtually…

um, they'll be hard. duh. ----------------- concrete is made of cement, sand and aggregate (stone, gravel, etc) so its a redundant question. Cement by itself is not very strong, its is a binder used to make concrete. In some cases sand is also the aggregate (QuickCrete is one product name)

zinc,cement,sand,concrete,stone,block,rods and brick

It depends on the required grade of concrete, you need to know the particular grade. The three grades specify the ratios of Cement : Stone : Sand. M15 = M150 = 1 : 2 : 4 M20 = M200 = 1 : 1.5 : 3 M25 = M250 = 1 : 1 : 2 As you can see there is always two parts sand to one part stone. Higher grades have more cement. So the…

Concrete is composed of cement and other cementitious materials such as fly ash and slag cement, coarse aggregate made of crushed stone, fine aggregate such as sand, water, and chemical admixtures. In reinforced concrete, steel is introduced in to the concrete. In plain concrete, no steel reinforcement is introduced. Generally tensile and compressive strength is taken by reinforced concrete and only compressive strength is taken by plain concrete

concrete consists of sand and stone bound together by a mixture of paste of cement and water

Concrete is made from cement and other cementitious materials such as fly ash and slag cement, coarse aggregate made of crushed stone, fine aggregate such as sand, water, and chemical admixtures. For more information please visit the related link.

In India the houses are built accordingly ... Each and every room has 4 concrete cement pillars built on Strong Iron Rods.. the walls are made from stone bricks which are plastered with cement outside to give it a flat look ,then painted ,the Roofs are made with Concrete Cement, with iron rods laid inside..

Yes concrete is a mixture. It is made from cement (which itself is a fairly complex mixture), aggregate such as stone (also a mixture), sand (a mixture) and water with other additives such as plasticizers etc. Concrete is a heterogeneous mixture.

Concrete is a mixture of cement, sand, stone, and water. In a cuibic meter of concrete, , there is about 0.3 cubic meters of sand, or about 475 kg

It is made from concrete with a facade of stone. Repairs done today use brick, but the principle material used cement.

You use thin set cement, a bit like very smooth concrete.

Yes, the word concrete is a noun, a common, concrete, uncountable noun; a word for a rough building material made from a mixture of broken stone or gravel, sand, cement, and water; a word for a substance, a thing. The word concrete is also an adjective: a concrete patio

Concrete setting is initiated by a process called hydration. Rather than the concrete just 'drying out', the hydration process involves the water added to the materials (stone, sand & cement) reacting with the cement. The water reacts with calcium in the cement to form an alkali paste which bonds the materials together. Adding too little water means not enough cement hydrates to set properly, but too much will cause separation of the materials.

The building material concrete is defined as material consisting of sand, conglomerate gravel, pebbles, broken stone, or slag in a mortar or cement matrix. Concrete can also be defined as 'existing in reality' or 'relating to a specific thing'.

Limestone is commonly used as the aggregate (the stone portion) in concrete. Additionally, limestone which has been cooked and powdered is the main ingredient of the cement which hardens and locks the aggregate together.

I think that they can, if they are both used correctly, the cement and concrete bricks can be put together in the same wall construction. :) <><><> I think you need to define some words. Concrete is made by mixing portland cement, water, and sand/crushed stone. There ARE no "cement bricks" Traditional bricks are made by mixing clay, shale, and water, and baking them in a kiln (oven) at high temperatures. And yes, regular clay…

Nature of Concrete * It is a composite material * Aggregates are 65-80% of volume Fine Aggregate - Sand Coarse aggregate - Stone * Cement : General term and applies to any bimder Portland Cement Fly ash Ground slag Silica fume * Water

This can vary do to the mixture of sand, stone, cement... but an approximate average would be 3000 lbs

Aggregate is the crushed stone (limestone, basalt, etc.) which is added to the cement slurry to reinforce the mixture and give it strength when solidified.

I assume you mean concrete which is a mixture of cement and coarse aggregate stone that has cured properly. There are many factors wich can reduce the strength of concrete over time but if the sample has been stored in an appropriate manner away from detrimental environmental influences the concrete should not weaken much over hundreds of years.

Concrete is a hetrogeneous mixture consisting of cement (itself a hetrogeneous mixture), water, lime, pozzolans, additives, sand, aggregate (stone of various sizes).

Pakka in Hindu means exact and sure. There is pucca or pukka housing which can be built with timber, concrete, cement, brick, or stone.

I've never heard the term 'white cement', but there are many good cement crack fillers available. I have used 'Stone Mason Liquid Crack Filler' and DAP Liquid Cement Crack Filler and been satisfied with both. You should look in the cement and concrete aisle in Home Depot. -

1:1:1 (1 part of cement,1 part of sand,1 part of chips stone)

this is quite simple the particles of stone are large and break easaly the particles of cement are small and wont crack as easaly the particles of sand are medium but dont crack like stone but arnt as rigged as cement put them all together and its like an ultamate shield/ concret

After being quarried it can be "roasted" in a revolving cylindrical "oven" to produce cement. Cement is in concrete and mortar, so the limestone has helped the construction of buildings and bridges. Indeed during the last World War there were even boats made from concrete. Limestone itself can be used as the foundation for road construction, and, like other types of stone, is used to construct stone buildings and stone walls. Lime and limestone are…

Concrete Gunite 3 part river sand, 2 parts stone (crusher), 1 part cement Mix stiff and hand pack.

Indian patent stone flooring of 2 inches i.e. basically cement concrete flooring Viraj saxena

Indian Patent Stone: Glass is often traded out for the agregate stone in cement applications. It is strong and hard & readily available & it can add a unique look to the finished floor that cannot be achieved with Gravel. This is what another answers question says about the composition: Where on flooring subjected load is not more the flooring should be laid as per requirement of IPS. IPS is an Indian Polished Stone or…

Examples of detrital sedimentary rocks and their uses: 1. Sandstone--cement ingredient, glassmaking, metal casting. 2. Limestone--antacids, concrete aggregate, manufacture of cement, building stone. 3. Conglomerate--building stone. 4. Shale--pottery, ceramics, brickmaking.

Yes, concrete is an example of a covalent bond. Concrete is a composite construction material composed primarily of aggregate, cement, and water. When concrete is made, in its process of setting, the cement undergoes hydration as it reacts with water to bind the matrix of sand and stone aggregate resulting in a silicate product, known as tobermorite. The tobermorite, thus formed in strong crystals adheres the sand and aggregate by means of silicon-oxygen covalent bonds.