Want this question answered?
What is the minimum distance between the bottom of a sink and the trap attachment for a bathroom sink
I don't think there is a "maximum drop" as long as you can put a door shoe on it to keep it air tight. If there is a gap then you will use more energy to cool or heat your home, which means higher bills.
An S trap would go through the floor. A P trap goes through the wall. As long as the drain is below the bottom of the sink, it should drain. Distance between the bottom of the sink, the trap and the drain does not matter, it just changes how much water stay in the drain. Normally it is just in the trap, but it can be above the trap if circumstances cause the trap to be lower than usual.
The real answer is the least amount that still allows the door to swing fully open and still clear all obstacles. OR the same distance as is common with the other doors in the home OR The easy answer is 1/4" to 3/8" for interior doors
When talking about hydraulic press machines, daylight means that there is a gap between the top and the bottom of the press when the top and bottom come together. This should not happen to ensure that proper pressure is achieved.
The distance between the bottom and the keel of a boat is the draught (British English).
standard distance between bottom and upper cabinets is 18".
It is the distance between the top of the can and the bottom.
The working distance is the distance between the cover slip and the bottom of the housing fo the objective lens.
It will differ depending on what your flooring is. should be somewhere around 1/2" to 1".
There are four exterior angles in a trapezoid, two on the top and two on the bottom.
What is the minimum distance between the bottom of a sink and the trap attachment for a bathroom sink
17-18".
The distance between the bottom and the keel of a boat is the draught (British English).
The distance between the bottom and the keel of a boat is the draught (British English).
The distance between the bottom and the keel of a boat is the draught (British English).
The distance between the bottom and the keel of a boat is the draught (British English).