To what torque should the rod and main bearings of a 1977 366 GMC truck engine be tightened? The rods have 3/8" bolts and it has 4 bolt mains with 1/2" bolts.
45
You will have to replace it. The bearings are worn out in the blower motor.
It needs replaced - bearings are out of it.
Because even on no load the motor has frictional losses in the bearings and windage around the rotor.
Typical of worn bearings....crank, cam and rod bearings.
A lot of manufacturers use a torque setting, but not Chevy. With the motor running, go to zero lash, and then 1/2, to a full turn from there.
It depends if you have enough doom to pull oil pan out if not you have to pull motor
what is the torque specs to a 2002 Chevrolet Malibu 3.1 liter motor. Need head and intake torque specs. and sequence.
Yes, a Chevy Trailblazer may be towed behind a motor home, provided the proper hitch, and trailer are used, and the towing vehicle has enough torque.
Pistons don't have bots. More information is needed.
it all comes down to what motor you have what trans and wut gears you have in your rear end
how to calculate hydraulic motor torque
Wheel bearings and allignment. Can be tires as well and sometimes even a bad motor mount.