Residential building codes vary substantially from municipality to municipality and should be checked locally, but at minimum a hallway width should be no less than 36 inches.
48 inches
the Bolo. Residential units are measured in "bolos."
the width required for building code space is a minimum of 30 inches.
The Massachusetts building code requires commercial buildings with residential housing above to comply with the International Building Code (IBC) for commercial structures and the International Residential Code (IRC) for residential units. Specific requirements may vary depending on the type of occupancy and building classification. It is recommended to consult with a local building official for accurate information.
Standard exterior door sizes are 36" and 32". However building code requires at least one egress door of 36" in a residential structure. What is the standard width for a screen door
The code allows for a higher rise in residential building which makes the stairs smaller in overall length.
You may get by the code, your lender will not like to hold paper on a floorplan which does not resell...
Depends on local building codes in the various regions. Check with the local building code inspectors of your local.
residential code requires 30" clear width and 60" depth.
Yes. There are many commercial buildings with residential apartments on the upper floors. However, you need to check with the city code enforcement department to determine if the particular building has any legal residential dwellings within the building.
The code for thermostat height location can typically be found in the International Residential Code (IRC) or the International Mechanical Code (IMC), which provide guidelines for construction and mechanical systems in residential buildings. Specific requirements regarding thermostat placement can vary based on jurisdiction and building type.
NAICS Code(s) 335121 (Residential Electric Lighting Fixture Manufacturing)