0
What is the rough opening for a 36 inch wide door in concrete foundation?
Wiki User
∙ 6y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is solid slab?
A solid slab is either solid concrete foundation or a flat solid wood door as opposed to a hollow core or a panel door.
How do you pour concrete on old concrete?
What you need to do first is to check if you have that room near the threshold of the door for that extra concrete(which is minimum of 3.5" inches) then you need to remove the top surface of the old concrete to be rough surface don't break too much just about an 1"wash clean and let it dry and only then to install the new concrete.
Explain how the feet of door frames with out a cill are secured to the concrete over site or screed?
drill holes and insert a concrete lag that follows layout for the door and then attach to the door casing.
When you are opening a classroom door what are the forces acting on it and how are they balanced out so that the door doesn't?
action an reaction
How do you determine if my wall is load bearing for my condo with a concrete flat roof I live in an older two story condo which I live on the second floor and I want to open up a wall?
If the concrete roof is on a brick load bearing wall you cannot open up the wall unless you have a concrete-steel beam below it . If you want a small door or window as opening you can open up the wall (not completely) but lay a beam under the wall for strength .
What is the rough opening of a 2'8 door?
Rough opening are 2" wider and 2-2 1/2" taller than than the door itself. 2/8" door needs a 2/10" wide opening.
What is the rough opening in carpentry?
Rough opening is an opening in a wall, or the framework of a building, into which a door frame or window frame, subframe, or rough buck is fitted.It is a measurement that a manufacture needs for installment of their component applications.
What is the rough opening requirement for an interior door that is 3 foot with a frame size of 3 foot 1-58?
The rough opening of an interior door is two inches wider than the width of the door and two inches higher than its height. Thus your rough opening width is 38". A typical interior door has a height of 80" which would require a rough opening height of 82" but check your door to ensure that is theheight.
What is the rough opening for a garage door?
For a 30" door, the rough opening would be 32" in width and 82" in height. Check with your local building inspection department just in case a larger door is required.
What is the size of the rough opening for a 42 inch wide exterior door?
The rough opening width for a 24" door is 26-1/2" The rough opening height for a 24" door is 26-5/8" Rough openings are 2" wider and 2-1/2" taller than the actual door. This allows room for the door frame and adjustment.
What is the rough opening requirement for an interior door that is 32 inches?
Make your rough opening 2 1/2 inches larger on the width and height.
What are rough in dimensions for a 36x80 door?
In most cases rough opening is 38 1/4x82 1/2.
What is the rough opening of a 36 inch door?
Remember 36" is the width of you door slab. If you can measure the door you want to frame in then take the measurement and add 3/4" to it so you can still have room on the side to shim it properly. If you don't have the door but know which one you want, go to the store and the door will normally have the rough opening size on the label.
If a door frame opening is 32 inches how large of a screen door do you need?
You will need a "2 6" or 30" wide door. Make sure your rough opening height is around 82 1/2".
Rough opening requirement for exterior door?
Add 2 1/2" to the width and height.
What is solid slab?
A solid slab is either solid concrete foundation or a flat solid wood door as opposed to a hollow core or a panel door.
What is the size of a rough opening for a 4X4 door?
4'1 1/2" by 4' 1 1/2"
