Hi, I have a 91 lebaron with the 3.0 v6. If it's the same, which I think it should be, there is a plastic cover under the top heater hose and distributor. This has the routing diagram printed on it. However, if it doesn't or it can't be read, take a pencil and paper and plot out all the pully's and the way the belt is routed provided it is still on the vehicle. It's pretty easy to do. It's helpful to have two people to replace, easier to keep tension on the belt when wrapping wround pully's.
serpentine belt routing diagram for 1994 dodge spirit
RockAuto.com has auto parts and body parts for the 1994 Chrysler LeBaron at discounted and wholesaler closeout prices.
In the fuel tank.
No, it does not have a reset switch.
One serpentine, and one "v" belt.
Lower radiator side of the engine.
5w30 or 10w30
The power steering is driven by the serpentine belt which must be changed by releasing the tensioner, located below the alternator. The only other belt is for the A/C compressor.
Blown fuse or failed radio.
Chrysler doesn't use inertia switches. The fuel system is computer controlled with relays
Chrysler does not use inertia/reset switches.
It is screwed into the exhaust manifold on the back of the engine.
It takes a 1 1/4 inch socket
The engine holds 4.5 quarts.
what is the belt diagram for a 1994 3.8L v6 mustang
Always use ATF3 or ATF4. Any other type of fluid in a Lebaron transmission will shorten the lifespan of the transmission.
In the exhaust pipe before the catalytic converter, which is right behind the engine
Your question is confusing because it sounds like you want to remove the whole car.
The routing should be in your owners manual if you have it or there should be a diagram under the hood.
Chrysler does not use inertia or shut off switches. The fuel system is computer controlled with relays.